TPCX012-0811 DUST COLLECTORS DC1, DC2 AND DC3 MODELS DUST-FREE VACUUM SYSTEM FILTRATION Conair Dust Collectors keep your plant free of air-born dust and fines and prevent dust from fouling the vacuum pump. A central vacuum dust collector allows dust filtration to take place at the floor level. An air-tight collection container makes the removal of fines quick and easy. Model DC3 Model DC2 Automatic filter cleaning is standard, lengthening the time between service requirements. DC1 and DC2 models use an integrated “popper valve” to remove dust from the filter, while the DC3 has a sophisticated sequential blowback system. EASY, NO TOOLS EMPTYING AND SERVICING The integrated dust canister releases easily for periodic emptying. A single hand knob opens the lid for quick access to the filter cartridge. Each model comes equipped with a free standing floor frame. On models DC1 and DC2, the stand may be removed for wall-mounting. An autodump option is available to automatically remove collected dust or to allow open dumping into other containers. The DC1 and DC2 are sized to provide the right amount of filter area for the pump CFM and line size of the conveying system. The largest dust collector, the DC3, provides three filters with an automatic sequential blowback system for maximum filter life. n Automatic filter cleaning The cartridge filter releases entrained dust with each cycle. n Tangential air/dust inlet Preliminary air/dust separation takes place right at the dust collector inlet. The tangential inlet causes the air to spiral upon entry, spinning the dust free from the air. n Flexible application Easy, screw-in line adapters in a wide range of sizes mean that each unit works with a variety of pumps and line sizes. n Simple maintenance Remove the dust collection canister without tools for easy dumping. No-tools filter removal provides simplified filter maintenance.

DUST COLLECTORS TPCX012-0811 DC1, DC2 AND DC3 MODELS S P E C I F I C AT I O N S out out A in in A B B MODELS DC1 DC2 DC3 Performance Characteristics Pump size range Hp {kW} * 3-7.5 {2.2-5.6} 10-25 {7.5-18.7} 3-25 {2.2-18.7} Vacuum line size OD in {mm} 1.5-2.5 {38.1-63.5} 2.25-4.0 {57.2-101.6} 1.5-4.0 {38.1-101.6} Filter area ft2 {M2} 42.8 {4.0} 100.3 {9.3} 162.0 {15.0} Maximum collection capacity ft3 {liters} 1.1 {31.1} 2.1{59.4} 1.1 {31.1} Recommended dust collection ft3 {liters} 0.75 {21.2} 1.0 {28.3} 0.75 {21.2} Dimensions inches {cm} A - Height 58.0 {147.3} 67.0 {170.1} 92.5 {235.0} B - Width...