"7CCOMUS GroupRI-02 SMD Series Dry Reed Switch RI-02 SMD Series Ultra-miniature dry-reed switch hermetically sealed in a gas filled envelope. Single-pole, single-throw (SPST) type, having normally open contacts, and containing two magnetically actuated reeds. The switch is of the double-ended type and may be actuated by an electromagnet, a permanent magnet or combination of both. The device is intended for use in senors, relays, pulse counters or similar devices. ■ Ideal for general purpose reed relays and sensors. ■ Contact layers: ruthenium on gold ■ Superior glass-to-metal seal and blade alignment Dimensions for RI-02 SMD Series All Dimension in inches (mm) nominal * For other pad layouts please contact us.

RI-02 SMD Series Dry Reed Switch Based on standard RI-02 models ORDERING INFORMATION Mechanical Data Contact arrangement is normally open; lead finish is tinned; net mass is approximately 90mg; and can be mounted in any position. AT Ranges** Series **Customer specific AT ranges are possible. Please contact your local sales representative. Coils All characteristics are measured using the Philips Standard Coil. For definitions of the Philips Standard Coil, refer to “Application Notes” in the Reed Switch Technical & Application Information Section of this catalog. Life expectancy and reliability...

RI-02 SMD Series Dry Reed Switch Surface Mounted Reed Switches The most common method of attachment is by SMD processing - stencil/screen solder paste, then oven reflow. Due to board thickness, component density, and other circumstances that dictate the required reflow temperature, Comus Technology uses a higher temperature solder for all internal connections. We recommend that the temperature (measured at the reed switch leads) does not exceed 260°C for 1 minute. Temperature and time in excess of the recommended levels may result in damage to the reed switch. Handling Force When possible don’t...

RI-02 SMD Series Dry Reed Switch Comus International 454 Allwood Road Clifton, New Jersey 07012 U.S.A Tel: (1)973 - 777 - 6900 Fax: (1)973 - 777 - 8405 email: [email protected] Website: http://www.comus-intl.com Comus Europe Ltd Unit 7, Rice Bridge Industrial Estate Thorpe - Le - Soken Essex, England CO160HL Tel: +44 (0)1255 862236 Fax: +44 (0)1255 862014 email: [email protected] Website: http://www.comuseurope.co.uk Comus Technology BV Jan Campertstraat 11 6416 SG Heerlen The Netherlands Comus Belgium BVBA Overhaamlaan 40 B-3700 Tongeren Belgium Tel: +33 (0)12 390400 Fax: +33 (0)12 235754...