Control' IOLB-8008 Part Number: 99645-3 KEY FEATURES AND BENEFITS • 8 point Digital Input lO-Link Block (Class A) • Input voltage or current • IP65/66/67 • Parameterization using IO-Link for easy installation and configuration • Data Storage capable for easy device replacement • IODD files IO-LINK BLOCK PRODUCT DESCRIPTION The IOLB-8008 is an IO-Link Block (Class A) with Digital Inputs that acquires binary control signals from the process level, and then transfers them (electrically isolated) to the controller. The status of the signal is displayed by LEDs and the signal connection is made through M8 connectors. The sensors are supplied from US1, which is derived from L+. The small IOLB-8008 form factor (H126 x W30 x D26.5 mm) means that they are suitable for use where space is at a premium. The small mass of the IOLB-8008 module facilitates applications with mobile I/O interface, for example, a robot arm. The robust design of the IOLB-8008 module enables them to be used directly at the machine. Control cabinets and terminal boxes are now no longer required. The module is fully sealed and therefore ideally prepared for wet, dirty or dusty conditions (IP67). Pre-assembled cables significantly simplify IO-Link and signal wiring. Very few wiring errors are made, so that commissioning is optimized. In addition to pre-assembled IO-Link, power and sensor cables, field-configurable connectors and cables are available for maximum flexibility. Sensors and actuators are connected through M8 connectors.

Communication Interface lO-Link Enclosure Industrial housing PA6 (polyamide) Ingress Protection Rating IP65, IP66, IP67 (conforms to EN 60529) Ports 1 - IO-Link Class A 8 - Digital Inputs Connector Type (IO-Link) M12, 5-poles, A-coded (Male) Connector Type (Digital Input/Output) M8, 3-poles, A-coded (Female) Connector Contacts Plated CuZn Mounting Method Machine or panel mount Mounting Mechanism Two mounting holes on the product for M3 screws LED Indicators IO-Link Communication status, Power Input L+, Power Input 2L+, Digital Input / Output Signal status Dimensions (L x W x H) 126 x 30 x 26.5...