KEY FEATURES AND BENEFITS • 4 channel analog input lO-Link Block (Class B) • Provides user scale and filters • Input either voltage or current • IP65/66/67 • Parameterization using IO-Link for easy installation and configuration • Data Storage capable for easy device replacement • IODD files IO-LINK BLOCK PRODUCT DESCRIPTION The IOLB-7014 provides four configurable differential analog inputs. The IOLB-7014 is intended to be connected directly to an IO-Link Master without an additional coupler box. The small IOLB-7014 form factor of only 126 x 30 x 26.5 mm (h x w x d), which means that they are suitable for use where space is at a premium. The small mass of the IOLB-7014 module facilitates applications with mobile I/O interface (for example, a robot arm). The robust design of the IOLB-7014 module enables them to be used directly at the machine. Control cabinets and terminal boxes are now no longer required. The module is fully sealed and therefore ideally prepared for wet, dirty or dusty conditions (IP67). Pre-assembled cables significantly simplify IO-Link and signal wiring. Very few wiring errors are made, so that commissioning is optimized. In addition to pre-assembled IO-Link, power and sensor cables, field- configurable connectors and cables are available for maximum flexibility. Sensors and actuators are connected through M12 connectors.

Communication Interface lO-Link Enclosure Industrial housing PA6 (polyamide) Ingress Protection Rating IP65, IP66, IP67 (conforms to EN 60529) Connectors 1 - lO-Link 4 - Analog Inputs Connector type (lO-Link) M12, 5-poles, A-coded (male) Connector type (Analog inputs) M12, 4-poles, A-coded (female) Connector Contacts Plated CuZn Mounting method Machine or panel mount Mounting mechanism Two mounting holes on the product for M3 screws LED Indicators lO-Link Communication status, Power Input L+, Power Input 2L+, Analog Input /Output status Dimensions (L x W x H) 126 x 30 x 26.5 mm ENVIRONMENTAL...