- Catalogs
- Composite Integration Ltd
- XE-0050-011
XE-0050-011
1 / 2 PagesView full catalog
XE-0050-011
Product catalog summary
Pressure Specifications:
- Pressure Range: 0—10 bar (Absolute)
- Over Pressure: 20 bar
- Burst Pressure: 25 bar
- Pressure Port O-Ring: EPDM
- Face Type: Ceramic
- Housing Material: 316L Stainless Steel
- Connector Type: M12 x 5 Pin connector
Input Specifications:
- Supply Voltage: 15—30VDC
- Input Current: ≤10 mA
- Load Resistance: ≥5.0 kΩ
- Protection: Inverse-polarity protection, short-circuit strength up to 30VDC at 25°C for 5 minutes
Output Specifications:
- Span: 10 bar, 0—10VDC
- TEB typical @ -25 ... +85°C: ±1.0% FS typical
- NLH @25°C (BSL) typical: ±0.2% FS typical
- TC zero point and span typical: ±0.02% FS/K typical
- Long term stability 1 year typical: ±0.2% FS typical
Environmental Specifications:
- Ambient Temperature: -25°C—+125°C
- Media Temperature: -25°C—+85°C
- Humidity: Max. 95% relative
- Vibration: 4g (10...2000Hz)
- Shock: 50g/8ms
- IP Rating: IP55 (IP67 with a mounted female connector)
Electrical Connections:
- 1: Not connected
- 2: Positive supply
- 3: 0V supply
- 4: Signal output
- 5: Earth
See more
Catalog excerpts
IMPS (In-Mould Pressure Sensor) 0 to 10 Bar Absolute 125°C with M12 Connector — Hex Body Pressure Specifications Pressure Range Over Pressure Burst Pressure Pressure Port O-Ring Face Type Housing Material Connector Type Document number—A DS-0043-A Issued: 23.06.
Open the catalog to page 1
Input Specifications Supply Voltage Input Current Load Resistance Inverse-polarity protection, shortcircuit strength @ 25°C during 5 min. Output Specifications Span TC zero point and span typ.: Long term stability 1 year typ.: Environmental Specifications Ambient Temperature Media Temperature IP55 (IP67 with a mounted female connector) Electrical Connections—see Figure 1 1 Positive supply Signal output
Open the catalog to page 2All Composite Integration Ltd catalogs and technical brochures
XE-0050-00104 Pages
XE-0050-0082 Pages
Ciject® Zero5 Pages
Ciject® One5 Pages
Related Searches
- Valve
- Stainless valve
- Vessel
- Test machine
- On/off valve
- Metal tank
- Stainless steel vessel
- Plastic seal
- Volumetric dosing unit
- Plastic vessel
- Industrial tank container
- Liquids dispensing system
- Industrial testing machine
- Metal insert
- Threaded insert
- Leak monitor
- Process valve
- Round insert
- Data acquisition unit
- Digital testing machine
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.