SINTESI MODBUS actuator
4Pages

{{requestButtons}}

Catalog excerpts

SINTESI MODBUS actuator - 1

SINTESI SMART Modbus ROTARY ACTUATOR FOR BALL VALVES WITH PROPORTIONAL CONTROL USE Building Management Systems (BMS) latest generation of domotic systems zone heating / cooling systems HVAC SINTESI SMART KEY FEATURES remote management via RS485 serial control with MODBUS-RTU communication protocol powered-on, current mode or modbus proportional control fast push connection with SINTESI SMART Modbus ball valve range manual operation SINTESI SMART Modbus TECHNICAL FEATURES Power supply Power consumption during operation Power consumption during standby Feeder cable Nominal torque Maximum torque EIA-RD 485 half duplex mode Operating angle Positioning accuracy Maximum noise (at 1m distance) Position indicator Rotating arrow Indoor, protected from frost Operational room temperature Ambient humidity Protection degree Insulation degree Outlet shell material Notes and Warnings: The device is designed to be used in heating systems, cooling systems, ventilation systems and - in general - in civil installations with features corresponding to the above-mentioned specifications. It can not be used outside the intended application field. The actuator must be installed indoors and far from the direct sunlight. VERSIONS Command Operating times

Open the catalog to page 1
SINTESI MODBUS actuator - 2

SINTESI SMART Modbus ROTARY ACTUATOR FOR BALL VALVES WITH PROPORTIONAL CONTROL FUNCTIONS Modbus communication The communication protocol used is compatible with MODBUS-RTU. The protocol handles up to 255 different tools. The data is transmitted as a packet (message) and is controlled by a word (CRC). There are no limits to the number of possible attempts the Master can make. The communication complies with the EIA-RS485 standard in half duplex mode. In this case, only one instrument at a time can keep the line busy, since only two wires are used; this means that there must be a master...

Open the catalog to page 2
SINTESI MODBUS actuator - 3

SINTESI SMART Modbus ROTARY ACTUATOR FOR BALL VALVES WITH PROPORTIONAL CONTROL ELECTRICAL CONNECTIONS Blue Brown Green White Pink Yellow COUPLING SEQUENCE TO BALL VALVES WITH FAST PUSH CONNECTION MOTOIRISED VALVE SEALING WITH LEAD By means of special seals (not included), it is possible to seal the motorised valve with lead, in order to prevent the actuator to be removed from the ball valve. MANUAL OPERATION In case of need, it is possible to open/close the ball valve manually, as follows: 1. Release the actuator from the ball valve; Insert the actuator in the body of the valve, without...

Open the catalog to page 3
SINTESI MODBUS actuator - 4

SINTESI SMART Modbus ROTARY ACTUATOR FOR BALL VALVES WITH PROPORTIONAL CONTROL OVERALL SIZE ACTUATOR 107 EXAMPLE OF SPECIFICATIONS SINTESI SMART MODBUS actuator by means of an RS485 serial control with MODBUS-RTU protocol, powered-on or current mode proportional control, torque: 8 Nm, power supply: 24V AC/DC, operating time: 90°, degree of protection: IP54, for ball valve: 2-way / 3-way / 6-way / PICV / by-pass, connection to the ball valve via SINTESI FAST PUSH CONNECTION. Brand: COMPARATO Code: SMMODBUS UPDATED DATA SHEETS AVAILABLE AT In order to provide an up-to-date service, Comparato...

Open the catalog to page 4

All Comparato Nello S.r.l. catalogs and technical brochures

  1. Pump units

    18 Pages

  2. Deaerators

    2 Pages