Catalogs >
Comparato Nello S.r.l. >
DIAMANT 2000 brass ball valve

DIAMANT 2000 brass ball valve
6Pages

Catalog excerpts

BRASS BALL VALVES WITH TANGS AND CAPS USE zone heating/cooling systems (HVAC) drinking water systems systems using alternative energy automation systems COMPARATO connection TECHNICAL FEATURES • The ball valves comply with Ministerial Decree 174 BRASS BALL VALVES COMPARATO connection FULL BORE DIAGRAM PN = f(T) When the value of the flow is known, the general expression for the calculation of pressure losses is the following: The expression provided applies to water or technically similar fluids. Water (maximum 30% glycol) TEMPERATURE • Minimum • Maximum HYDRAULIC VERSIONS AND FEATURES MIXER / DIVERTER 90° 3 HOLES 20 25 1" M * without bypass tees BY-PASS ball valve For all valves the max differential pressure value coincides with PN

Open the catalog to page 1

BRASS BALL VALVES WITH TANGS AND CAPS 2-WAY BALL VALVE The ball valve can be mounted in both flow directions, without distinction. OPEN valve CLOSED valve OPENING actuator CLOSING actuator 3 WAY DIVERTER/MIXER BALL VALVE The 3-way version of Diamant 2000 is available with two different balls. In both cases, one of the holes is positioned on the common way, which is therefore always open. DIVERTER / MIXER - 3 HOLES • C = COMMON WAY MIXER/DIVERTER BALL VALVE (3-HOLE BALL) The MIXER/DIVERTER ball valve has a 3-hole sphere with one hole pointed towards the common way C (always open) and two...

Open the catalog to page 2

BRASS BALL VALVES WITH TANGS AND CAPS MATERIALS USED 2-WAY COMPARATO CONNECTION BRASS BALL VALVE 1 BRASS \ CW 617N - UNI EN 12165 NICKEL PLATING BRASS \ CW 617N - UNI EN 12165 CHROMED NICKEL BRASS \ CW 614N - UNI EN 12164 NICKEL PLATING BALL SEAL ANTIFRICTION SEAL 3-WAY COMPARATO CONNECTION BRASS BALL VALVE 1 BRASS \ CW 617N - UNI EN 12165 NICKEL PLATING BRASS \ CW 617N - UNI EN 12165 CHROMED NICKEL BRASS \ CW 614N - UNI EN 12164 NICKEL PLATING BALL SEAL ANTIFRICTION SEAL INSTALLATION The valve should be installed in such a way that the actuator connection is not facing downwards. ALLOWED...

Open the catalog to page 3

BRASS BALL VALVES WITH TANGS AND CAPS CONNECTION TO THE BALL VALVE For the evaluation of the overall size of motorised valves, take into account the assembling diagram (shown below) and the dimensions of each single component. Diamant 2000 COMPARATO connection 1: 2: Diamant 2000 COMPARATO connection Ball valve OVERALL SIZE BALL VALVES BRASS MODEL 2-way COMPARATO Connection D : dimensions referred to the ball valve without tangs and caps BALL VALVES BALL VALVES D - E : dimensions referred to the ball valve without tangs and caps BALL VALVES D - E : dimensions referred to the ball valve...

Open the catalog to page 4

BRASS BALL VALVES WITH TANGS AND CAPS

Open the catalog to page 5

BRASS BALL VALVES WITH TANGS AND CAPS EXAMPLE OF SPECIFICATIONS DIAMANT 2000 BRASS BALL VALVE • CW617N UNI EN 12165, EPDM and PTFE seals, full bore, PN16, with tangs and caps, UNI EN ISO 226 threads. Operating temperatures +5°C…+100°C. Fluid type: water with glycol max 30%. Connection to the actuator with Comparato Connection Version: 2-way MM DN15 - 1/2" - Kvs 16,3 Brand: COMPARATO Code: DC2A2A UPDATED DATA SHEETS AVAILABLE AT www.comparato.com In order to provide an up-to-date service, Comparato Nello S.r.l. reserves the right to modify technical data, drawings, graphs and photos of this...

Open the catalog to page 6

DIAMANT 2000 brass ball valve 6Pages

Catalog excerpts

All Comparato Nello S.r.l. catalogs and technical brochures

DIAMANT 2000 brass ball valve
6Pages