Diadef Magnetic HYDROCYLONIC DEPOSIT SEPARATOR WITH BUILT-IN MAGNET Diadef Magnetic deposit separator combines the hydrocyclonic action with the magnetic action to ensure maximum efficiency in the collection and blocking of impurities and ferromagnetic particles. The inlet fluid runs into a baffle, which creates a spiral motion inside the central cylinder-shaped body: in this phase, the centrifugal force thrusts those particles which are heavier than water against the walls of the deposit separator, where they slow down. Then, dirt particles exit from the turbulence zone and easily descend into a special sump: once settled, they can not enter circulation again, thanks to the low speed of fluid in the area affected by the cyclonic effect. The purified fluid then exits the deposit separator through a fixed route on its upper part. The magnetic action is guaranteed by the presence of powerful neodymium N52 magnets mounted near the sump. The magnets are placed inside a removable coupling, so that during the draining operations it is possible to easily extract the magnets, letting the retrained particle fall in the sump and, then, be discharged. HYDROCYCLONIC ACTION 1. diamagnetic sump* • 2. removable magnet holder • 3. magnet * The diamagnetic sump allows the extraction of the magnet from its Diadef Magnetic TECHNICAL FEATURES • • • • Maximum fluid temperature: 90° Maximum fluid pressure: 5 bar Material: carbon steel EN 10255 Paint: water-based primer, red INSULATION TECHNICAL FEATURES • Cross-linked closed-cell polyethylene insulation, fire-proof, antistatic and scratch-proof. SUMP APPLICATION EXAMPLE: REMOVABLE MAGNET HOLDER DIRT DRAIN DIADEF MAGNETIC

Diadef Magnetic HYDROCYLONIC DEPOSIT SEPARATOR WITH BUILT-IN MAGNET VERSIONS CONNECTIONS Magnetic deposit separator code Insulation code Magnetic deposit separator code Insulation code FLUID-DYNAMIC FEATURES (losses in primary and secondary circuits shall be calculated separately) Kv= flow coefficient [m3/h] Q : flow rate [m3/h] Δp : pressure drop Δp = (Q / Kv)2 Kv and INDICATIVE FLOW RATES THREADED Ø

Diadef Magnetic HYDROCYLONIC DEPOSIT SEPARATOR WITH BUILT-IN MAGNET OVERALL SIZE THREADED MAGNETIC DEPOSIT SEPARATOR SIZE - GAS INSULATION SIZE FLANGED MAGNETIC DEPOSIT SEPARATOR SIZE INSULATION SIZE

Diadef Magnetic HYDROCYLONIC DEPOSIT SEPARATOR WITH BUILT-IN MAGNET NON-STANDARD MAGNETIC DEPOSIT SEPARATORS Iron and stainless steel deposit separators are available on request with non-standard measures, according to the customer's drawings. Examples. EXAMPLE OF SPECIFICATIONS DIADEF MAGNETIC deposit separator with magnet for thermal power station, DN65 flanged connections with PN10-16 flanges, 1"1/2 F vent valve connection, 1" F exhaust valve connection, maximum temperature 90°C, maximum pressure 5 bar, EN10255 carbon steel, red water-based primer coating. Brand: COMPARATO Code: DFI212 UPDATED...