C-Series - Portable Compressors
14Pages

05 PORTABLE COMPRESSORS The right solution for any application C14 – C270TS-9 INTELLIGENT AIR TECHNOLOGY

alternative to electrical tools. Small, compact and lightweight, at only 142 kg weight with Perfect for a wide-range of repair This range has the output to run up to two breakers and are driven by quiet-running energy efficient Kubota engines. With the benefit of a wide engine speed range, fuel savings are increased and the engine reliability and life time are enhanced. The various applications of these compressors can be further enhanced by integrated generators, which can supply power for the site, lighting and electrical tools. With an operating weight of less than 500 kg (unbraked) the...

Technical Data adjustable towbar Base mount straight towbar =) Noise level acc. to PNEUROP PN8NTC2.2 at 7 m 31 Operating weight without options 4> Legal limiting values of EC directive acc. to 2000/14/EC

The highly successful CompAir range C35-10 - C50 is driven by very quiet-running, water-cooled Yanmar 4TNV88BKCP 4-cylinder diesel engines. The compressor is particularly suitable for applications in cities and built-up areas, where strin- gent restrictions are set on noise emissions. The light construction of under 750 kg (C38 and C42) makes the compressor suitable for many different applications and is therefore ideal for use by hire companies. These compact and lightweight compressors are available with various chassis and also with the option of integrated generator or aftercooler or...

Technical Data adjustable towbar straight towbar Base mount " Acc. to ISO 1217 Ed. 4 2009 Annex D 2> Operating weight without options 4' Noise level acc. to PNEUROP PN8NTC2.2 at 7 m 1 Legal limiting values of EC directive acc. to 2000/14/EC

These proven and tested compressors stand out for their low fuel consumption and high efficiency. Thanks to a wide pressure range up to 14 bar, this compact compressor range is extremely versatile and meets many requirements of numerous applications. The compressors have enough storage capacity for two hammers, picks or any other pneumatic tools. Separate engine and compressor air filters guarantee a long service life. All of the service points are strategically located for easy access. diesel engine extends the engine life time by reducing engine stress during start-up and allowing the...

Technical Data adjustable towbar Base mount " Acc. to ISO 1217 Ed. 4 2009 Annex D 2) Operating weight without options 4> Noise level acc. to PNEUROP PN8NTC2.2 at 7 m 1 Legal limiting values of EC directive acc. to 2000/14/EC

Designed for the toughest site conditions, whether it's for road building, civil engineering or restoration work, this range of compressors offers outstanding reliability, performance and compressed air quality, with fully accessible doors maintenance is also made easy. The compressor as standard is equipped with numerous options, offering a substantial cost saving to the customer. Thanks to the inclusion of two batteries reliable running and performance can be achieved even in the coldest winter. The long life cycle of these compressors is further enhanced by additional engine management...

Technical Data adjustable towbar Base mount " Acc. to ISO 1217 Ed. 4 2009 Annex D 2> Operating weight without options " Noise level acc. to PNEUROP PN8NTC2.2 at 7 m 1 Legal limiting values of EC directive acc. to 2000/14/EC

Patented bi-turbo technology = Low cost of ownership! A radical new approach to energy conservation. The CompAir TurboScrew patented bi-turbo technology makes these compressors outstanding in their class. On average site conditions where the demand varies between idle, part load and full load, the TurboScrew consumes up to 30% less fuel than most of the conventional compressors on the market. TurboScrew Technology CompAir's TurboScrew compression system is a radical new approach to energy conservation. It uses a Cummins turbo assisted engine powering a CompAir screw compressor unit with the...

Technical Data Base mount " Acc. to ISO 1217 Ed. 4 2009 Annex D 2) Operating weight without options 3) Legal limiting values of EC directive acc. to 2000/14/EC

AirPlus €> Many options for many applications + Optional ✓ Standard — Not available Engine Accessories - Electronically controlled synchronous generator - Insulation monitoring - Output voltage regulation motor speed

AirPlus €> Many options for many applications Breakers Sand-blasting Ice-blasting © Schematic display of all available air treatment options Spray Painting Mole operations Cable blowing Concrete spraying Aftercooler with automatic conden sate separation (Heat exchanger) Built-in mircorfilter connection with combination (ZTV-SIB 90) ISO 8573.1 CLASS 1_1 Concrete spraying Stop valve ✓ depending on manufacturer and application — not needed Built-in aftercooler with automatic water separation. Reduces water content in the compressed air. An additional heat exchanger uses compressor oil to heat...

INNOVATIVE PRODUCTS AND SERVICES - TRUST COMPAIR TO SUPPLY INTELLIGENT COMPRESSED AIR SOLUTIONS. Air Plus offers many • Ultra-fine filters • Integrated generator • Hose reel • Exhaust spark arrestor • Customer colours Turboscrew Technology fuel consumption Variants & Options: • Terminal strip • Customer colours • Chipping Hammers damped tools: • Large selection of pointed chisel, slat chisel and • Water separator with or without oiler • Worldwide service • Reliable supply of spare • Individual customer CompAir policy is one of continuous improvement and we therefore reserve the right to...