Catalogs >
ComNav Technology Ltd. >
T30 GNSS Receiver

T30 GNSS Receiver
1 / 2Pages

Catalog excerpts

T Series GNSS Receiver ULTRA-RELIABLE GNSS 15.5 cm Size: 15.5 cm × 7.3 cm Weight: 1.2kg with two batteries Features GPS L1/L2/L5, BeiDou B1/B2/B3, GLONASS L1/L2/L3, Galileo E1/E5a/E5b/ AltBOC,SBAS, QZSS, IRNSS1 BeiDou Global Signal B1C, B2a WIFI/UHF/4G Module Tilt Compensation Two 3400 mAh hot swap Batteries SinoGNSS T30 GNSS Receiver is an extremely compact designed receiver, tracking all current GNSS and planned Global GNSS constellations, as well as L-Band capability. With the QUANTUMTM algorithm and second generation SinoGNSS ASIC chip inside, it largely improves positioning reliability and stability, especially in obstacle environment. FLEXIBILITY FOR FIELD USE Featuring full-constellation tracking capability, tilt compensation, 4G/WiFi/Bluetooth® connection, and easy survey workflow with Android-based Survey Master Software, the T30 GNSS receiver is one of the most reliable choices for your demanding surveying tasks. Collect more accurate data easier and faster no matter for beginners or professional surveyors. Its built-in tilt sensor supports maximum 30°pole tilt, and you can check electronic bubble on the controller for fast survey in the field. The rugged Al-mg alloy housing with IP67 Dustproof & Waterproof design makes the T30 perfectly and effectively work even in harsh environments. Low Power Consumption Support PPP and L-Band2 SMART BATTERY DESIGN With two 3400mAh hot swap batteries, the T30 helps to extend working hours and ensures you fluent workflow in the field. The battery LEDs flash when battery shortage, then you can replace batteries or directly charge in T30 through an external power. 2020, ComNav Technology Ltd. All rights reserved. is the official trade mark of ComNav Technology Ltd., registered in People’s Republic of China, EU, USA and Canada. All other trademarks are the property of their respective owners. (November, 202

Open the catalog to page 1

T30 GNSS Receiver Signal Tracking T Series GNSS Receiver Data Format BeiDou Global Signal RTCM 2.x, 3.x formats, CMR(GPS only),CMR+(GPS only) Position data output ASCII: NMEA-0183 GSV, RMC, HDT, VHD, GGA, GSA, ZDA, VTG, GST; PTNL, PJK; PTNL, AVR; PTNL, GGK ComNav Binary update to 20 Hz WAAS, EGNOS, MSAS, GAGAN Performance Specifications Cold start Warm start Initialization time Signal re-acquisition Initialization reliability Environmental Operating temperature Storage temperature IP67,protected from temporary immersion to depth of 1 m Designed to Survive a 2 m drop onto concrete...

Open the catalog to page 2