N2 Palm GNSS Receiver GNSS Surveying System Ver.2025.05.26 Survey Master Compatible with most of Android devices Easier survey workflow via Wizard function Support up to 60° IMU tilt compensation Support all survey modes, including Static, PPK and RTK Support Surface Stake, Mapping Survey and etc. to serve various survey tasks Support CAD import and directly use for stake out operations Support Convert function from ComNavBinary raw file to RINEX IJJI Microsurvey FieldGenius S Microsurvey FieldGenius Signal Tracking - Serial Port: Support serial communication Range Pole interface: Standard 5/8'' UNC female thread UHF port: TNC Performance Specification Signal Re-acquisition<1s Cold Start: <45s Hot start: <15 s RTK Initialization Time: <10s Initialization reliability: >99% Static and Fast Static Long Observation Static DGPS SBAS Tilt Survey: up to 60 ° tilt with 2. 5cm accuracy Data Update Rate: 1Hz, 2Hz, 5Hz, 10Hz UHF: - Tx/Rx with full frequency range from 410-470MHz - Transmit power: 0.5W, 1W, 2W adjustable - Air Baud Rate: 9600/ 19200/ 11000 adjustable - Protocol type: support Transparent/TT450S/South/Mac/SNLonglink, compatible with all the ComNavTech GNSS Receivers Storage Temperature: -40C~+85C Humidity: 100% non-condensing Water- & Dustproof: IP67 Shock: Survive a 2m drop onto the concrete Housing Material: Magnesium aluminum alloy Dimension: 149±1mm(<fi), 48±1mm(H) Survey Master Android-based data collection software_ MicroSurvey FieldGenius field data collection software (optional) Post-processing Software SinoGNSS Compass solution software Data Format - Correction data I/O: RTCM 2.X, 3.X, CMR (GPS only), CMR+ (GPS only) Position data output: - ASCII: NMEA-0183 GSV, RMC, HDT, GGA, GSA, ZDA, VTG, GST; PTNL, PJK; PTNL, GGK -ComNav Binary update to 20 Hz 1.8GB is the default internal memory and optional 16GB, 32GB is available to order. Please clarify when placing the order. 2.Working distance of internal datalink varies in different environments, the maximum distance is 15km in ideal situation. Specifications subject to change without notice. Provide the complete GPS/GLONASS/BeiDou/GALILEO post-processing solution Support GNSS observation data in RINEX and ComNav Raw Binary Data format Support different post-processing in static and kinematic modes Output analysis reports in various formats (web format, DXF, TXT, KML) Supports DJI’s P4R data format. Processing results can be imported into photogrammetry and 3D modeling software directly Electrical Specification- Power Consumption: RX mode<1.8W, TX mode<3.6W Over Current Protection Voltage: 30V, VBUS 9.99V Charging Time: <5h(QC2.0) GNSS Receiver LIGHTER, THINNER, FASTER A Decade of Innovation, A RTK of Originality Building 2, No. 618 Chengliu Middle Road, Email: [email protected] ©2025, ComNav Techno logy Ltd. All rights reserve d.SfooGNSS the official trade markof ComNav Techno logy Ltd., registered in People’s Republic of China, EU, USA and Canada. All other trademarks are the property of their respective owners. (August, 2025).

I R50 Data Collector FULL-CONSTELLATION & FULL-FREQUENCY TRACKING With 1590 channels and 50+ satellite tracking capabilities, N2 has excellent performance under harsh conditions. SATELLITE TRACKING 5.5-inch sunlight readable screen, 720*1280 resolution customized for engineers, more comfortable hold With advanced NFC, tedious matching is a thing of the past PETITE RECEIVER The slim-line design is refined to be only 48±1mm and 670g. With highly integrated main board and three-in-one antenna, it can be grasped on hand like a book. In-built IMU supports 60°tilt compensation. Get precise measurement...