*mydirectindustry

Catalogs
COMMEX srl
CX.KC38-33G

CX.KC38-33G

1 / 2 PagesView full catalog

CX.KC38-33G

Product catalog summary

Geared Motors Specifications:

Gearbox Data: The housing is made of zamac die-casting. The gearbox features a backlash at no load of ≤2°, sleeve bearings at the output, and a radial load capacity of ≤0.8Kgf at 10mm from the flange. The shaft can handle an axial load of ≤0.6Kgf and a press fit force of ≤10Kgf. Radial play is ≤0.05mm, and thrust play is ≤0.35mm. Length varies with gear ratio: 20.0mm for 1:8~1:50, 24.5mm for 1:125~1:312.5, and 29.0mm for 1:781~1:1953.
Motor Data: The motor is a DC carbon-brush type with nominal voltages of 12V and 24V. No load speed is 6500rpm for both voltages, with no load current of ≤0.11A at 12V and ≤0.06A at 24V. Rated speed is 5240rpm at 12V and 5270rpm at 24V, with rated current of ≤0.46A at 12V and ≤0.24A at 24V. Rated torque is 58g-cm for both voltages, with rated output of 3.13W at 12V and 3.10W at 24V.
Options: A Hall sensor magnetic encoder is available, and electric specifications can be customized according to customer requirements.

Motorgearbox Performance:

Performance varies by model and gear ratio, with general tolerances of ±15%. For example, the CX.KC38-33GG model with a 1:8 gear ratio operates at 812rpm no load speed at both 12V and 24V, with a rated torque of 0.5 Kg-cm and a maximum momentary tolerance torque of 8.0 Kg-cm.
As the gear ratio increases, the no load speed decreases, and the rated torque increases. For instance, the CX.KC38-33GA model with a 1:1953 gear ratio operates at 3rpm no load speed at both 12V and 24V, with a rated torque of 5.0 Kg-cm and a maximum momentary tolerance torque of 10.0 Kg-cm.

Catalog excerpts

COMMEX S.R.L. Via Z.A. Fossetta, 43 – 35020 Terrassa Padovana (PD) / ITALY Phone +39/0499501645 – Telefax +39/0499501213 Web: www.commex.eu – Email: [email protected] Geared Motors CX.KC38-33G Gearbox Data: Housing: zamac die-casting Backlash at no load: ≤2° Bearing at output: sleeve bearings Radial Load (10mm from flange): ≤0.8Kgf Shaft axial load: ≤0.6Kgf Shaft press fit force (max): ≤10Kgf Radial play of shaft: ≤0.05mm Thrust play of shaft: ≤0.35mm Length : 1:8~1:50 = 20.0mm 1:125~1:312.5 = 24.5mm 1:781~1:1953 = 29.0mm Motor Data: DC Carbon-brush motor Nominal Voltage: 12/24Vdc No Load Speed: @12V: 6500rpm - @24V: 6500rpm No Load Current: @12V: ≤0.11A - @24V: ≤0.06A Rated Speed: @12V: 5240rpm - @ 24V: 5270rpm Rated Current: @12V: ≤0.46A - @24V: ≤0.24A Rated Torque: @12V: 58g-cm - @24V: 58g-cm Rated Output: @12V: 3.13W - @24V:3.10W Motor Characteristics: Option: Hall sensor magnetic encoder Customize the electric specification according to the customer requirement *** FOR REFERENCE ONLY *** Rev. January 2015

Open the catalog to page 1

COMMEX S.R.L. Via Z.A. Fossetta, 43 – 35020 Terrassa Padovana (PD) / ITALY Phone +39/0499501645 – Telefax +39/0499501213 Web: www.commex.eu – Email: [email protected] Motorgearbox Performance: Model Gear ratio *** FOR REFERENCE ONLY *** Rev. January 2015

Open the catalog to page 2

All COMMEX srl catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list