Group: COMITRONIC - BTI
LockGard ® - Dispositif de sécurité de verrouillage de sectionneur, organe de mise sous tension, protecteur de machine dangereuse avec gestion entrée / sortie par commande par clef spéciale RFID avec 16 millions de codages
8Pages
Catalog excerpts
COMITRONIC - BTI LOCKING WITH SMART DIGITAL RFID KEY 16 MILLION CODES, EQUIPPED WITH A SELF-LEARNING SYSTEM BY COMITRONIC-BTI Interlocking safety device for rotary disconnect switch, power-on device, hazardous machine safeguard with input/output management by special RFID key control up to 16 million codes.
Open the catalog to page 1Technical Data Types of Errors LDP : Potential-free PNP : Switching to positive potential load NPN : Switching to negative potential load NO : Normally open NF : Normally Closed
Open the catalog to page 2The rotary disconnect switch is in the ON position, the machine is running, the key is trapped Machine under voltage Rotary disconnect switch and Lockgard® M1 • • • • • • The latch is retracted The key is trapped (in position V) The rotary disconnect switch is free to rotate contacts T11/T12 T21/T22 are closed RFID identifiers are transmitted The indicator light is green
Open the catalog to page 3COMITRONIC - BTI Stop the Machine Safety Rotary disconnect switch and Lockgard® M1 • Turn the rotary disconnect switch to OFF • The current or power unit is closed A3 Lockgard® M1 • Activate the unlocking command (red UNLOCK wire), the indicator light is orange • Turn the key from right to left (in position H), the indicator light is red • The key is free • The latch locks the rotary disconnect switch • Contacts T11 / T12 T21 / T22 are open Lockgard® M1 • Remove the key • Loss of th
Open the catalog to page 4COMITRONIC - BTI Restart the Machine Safety LOCKGARD® M1 • Insert the key, the indicator light is orange • RFID ID are transmitted A3 Lockgard® M1 • Turn the key from left to right (in position V), the indicator light is green • The key is trapped • The latch is retracted • The rotary disconnect switch is free to rotate • The contacts T11/T12 T21/T22 are closed Lockgard® M1 • The rotary disconnect switch is closed • The current or p
Open the catalog to page 5COMITRONIC - BTI Hazardous machine safeguard locking with input/output management Safety The latch is out, the door is locked The key in position H is trapped RFID ID are transmitted The contacts T11/T12 T21/T22 are closed The indicator light is green Lockgard® M2 • Activate the unlocking command (red UNLOCK wire), the indicator light is orange • Turn the key from right to left (in position H), the indicator light is red • The latch is retracted • The key is free • Contacts T11 / T12 T21 / T22 are open Lockgard® M2 • The key is removed and the operator enters the dangerous zone in complete...
Open the catalog to page 6Latch diameter: ø10 : Lockgard®_M2 ø6 : Lockgard®_M
Open the catalog to page 714 Rue Pierre Paul de Riquet 33610 Canéjan - France Tel : +33 5 64 10 04 52 Email : sales@comitronic-bti.com www.comitronic-bti.com
Open the catalog to page 8All COMITRONIC - BTI catalogs and technical brochures
-
Interlock Kar
2 Pages
-
Catalogue
26 Pages
-
Catalog 2019-2020
17 Pages
-
Catalog Button 5th Generations
28 Pages
-
COMITRONIC-BTI
24 Pages
-
Booklet Fr,En,De,It
20 Pages
-
Booklet
4 Pages
-
Catalog RFID
16 Pages
-
Catalog Bouton
34 Pages
-
Booklet General
8 Pages
-
Product All
28 Pages