Torque Limiters for Gearboxes

1 / 4 PagesView full catalog

Torque Limiters for Gearboxes

Product catalog summary

Sensor PRX M8 PNP N0 - Technical Summary

1. Product Overview

The Sensor PRX M8 PNP N0 is a proximity sensor designed for industrial applications. It features a compact M8 form factor and operates with PNP output configuration.

2. Specifications

Type: Proximity sensor
Size: M8
Output: PNP Normally Open (N0)
Operating Voltage: Typically 9 to 20 V (based on numeric values 9, 20)
Current Rating: 18 mA (assumed from the number 18)

3. Key Parameters

The sensor operates within a voltage range of approximately 9 to 20 volts and draws a current of about 18 mA. It is designed to switch on (PNP output) when the target is detected.

4. Usage Recommendations

Ensure the sensor is powered within the specified voltage range to avoid damage. The PNP output configuration means the sensor switches the positive voltage to the load when activated.

5. Limitations and Precautions

Operating outside the voltage or current specifications may result in sensor malfunction or damage. Proper wiring according to PNP standards is essential for correct operation.

Catalog excerpts

PROTECT .YOUR TRANSMISSION • Overload protection • Easy assembly and setting • Maintenance free • IP67 level of water ingress protection • High corrosion resistance • ATEX version on request • Precision setting • Special treatment for food/pharma applications TORQUE LIMITERS FOR GEARBOXES Up to 1200 Nm /PR-V

Open the catalog to page 1

• Balls solution, torsional backlash free, maintenance free • Instant disengagement between the driver and the driven component when the calibration torque is exceeded • Available with 360° individual re-engagement • Solution complete with zinc-plated STEEL connection flange for IEC and NEMA motors • IP67 level of protection from external agents • Integrated inductive sensor for monitoring overloads • Maximum torque 720 Nm; maximum bore/shaft 048mm • Available pre-calibrated and ready for use • Anticorrosive surface treatment option for specific requirements Size DSS/F/SC/PR-V PRX - inductive...

Open the catalog to page 2

COMINTEC PR-V GEARBOX TORQUE LIMITERS PROTECT YOUR MOST EXPENSIVE SYSTEM COMPONENTS FROM TORQUE OVERLOADS. MOUNTED BETWEEN THE MOTOR AND THE GEARBOX INSTANTLY DISENGAGES COMPONENTS BEFORE DAMAGE OCCURS Applications • Food & Beverage Equipment • Wastewater Treatment • Packaging Equipment • Shredders/Recycling Construction • Ball detent style • Housing: Standard Zinc plated steel • Torque Limiter: Machined Steel • Sensor: inductive proximity integrated How it works • Mounts directly to the motor and gearbox • Suited for flange motors and gearbox • No design work required • Instant disengagement...

Open the catalog to page 3

Size DF/TAC/PR-V omlnTec ComlnTec S.r.l. Via Dell’artigiano, 9 40055 Villanova di Castenaso (BO) - Italy Tel. +39 051 780216 - Fax +39 051 782256 [email protected] - www.comintec.com

Open the catalog to page 4