Laboratory jet mills and air classifers
5Pages

Small scale system for laboratory applications Oslo - Norway

filling of the mill chamber. It also has a built-in air classifier providing the particle size control. The separate ACX air classifier can be connected to the jet mill to provide dual air classification or it can be used separately, depending on the process requirement. The B system can also be used for producing very small material samples for preliminary verification regarding further processing. Finally, the particle size distribution can be measured at the outlet by an on-line analyser providing constant size control of the produced particles. This measurement can be done on all...

Main features jet mill Main features Feed rate measurement by the “loss of weight” system Possibility to add chemicals (grinding aids) Mechanical stirring of the hopper to provide efficient flow of the material Control and instrumentation – parameters registered and stored in the system Mill chamber diameter 100 mm Feed rate control in kg/h Mill nozzle pressure 5-10 bar Mill classifier speed and load control Mill classifier speed in rpm Product top size adjustment from 3 to 300 microns Mill motor load in A Air classifier Rotor diameter 50 mm Mill nozzle pressure control in bar Air...

JMX- 50 ACX- 50 jet mill air classifier Filter product Coarse fraction Coarse fraction The JMX- 50 and ACX- 50 can be used in different configurations as shown above. More information about the JMX jet mill and the ACX air classifier system can be obtained on our web site: www.comex-group.com or by sending email to: technical@comex-group.com

Po Box 53 Location: Olav Ingstadsvei 5 1309 Rud Norway