X-Ray Tubes - MXR-320HP/11-90

Product catalog summary

Product Description
The MXR-320HP/11-90 is a bipolar oil-cooled X-Ray tube assembly designed for non-destructive imaging applications. It features dual focal spots, a high-power tungsten anode, and a directional beam with integrated radiation protection.

General Information
The integrator is responsible for controlling high-voltage, tube current, and filament current, as well as the cooling system and radiation protection. Compliance with local regulations is mandatory, and any modifications to the product will void the warranty.

Connection and Installation
High-voltage cables should be installed by trained personnel, ensuring cleanliness, proper greasing, and correct pressure. The cooling circuit must be properly connected and monitored to prevent overheating.

Product Specifications

Nominal tube voltage: 320 kV
Continuous rating: 800 W | 1800 W
Maximum cyclic rating: 700 W | 1500 W
Focal spot size: 0.4 mm | 1.0 mm
Filament current, max: 4.1 A | 4.2 A
Filament voltage, typical: 2.3 V | 6.2 V
Inherent filtration: 3.0 mm Be
Target material: Tungsten
Target angle: 11°
Radiation coverage: 40° x 30°
Leakage radiation: Max 5 mSv/h at 1m distance
Weight: 40 kg
Terminal type: R24

Cooling Specifications

Cooling medium: Oil
Minimum flow rate: 14 l/min
Maximum inlet temperature: 50°C
Maximum inlet pressure: 6 bar
Dielectric strength: ≥ 50kV/mm
Recommended oil: Shell Diala S4 ZX-I
Post-cooling time: 2 minutes

Catalog excerpts

X-Ray Tubes MXR-320HP/11-90 Product Description The MXR-320HP/11-90 is a bipolar oil-cooled X-Ray tube assembly with integrated radiation protection. It comprises dual focal spot, a high power tungsten anode and a directional beam. The tube is specifically designed for non-destructive imaging applications. Power rating chart Power rating at a given filament current mA 30 25 20 15 10 5 0 0

Open the catalog to page 1

Product Specifications Nominal tube voltage Continuous rating (non-cyclic) Focal spot acc. ASTM E1165-12 Filament voltage, typical Inherent filtration Target material Target angle Radiation coverage Leakage radiation, max. ar loading factors in 1m distance Weight Terminal type Gapping spring-loaded HV-cable Gapping non-spring-loaded HV-cable Grease quantity for HV-cable terminal Product No. General The control of high-voltage, tube current and filament current as well as the design of the cooling system and the radiation protection are within the responsibility of the integrator. Settings in...

Open the catalog to page 2

X-Ray Tubes - MXR-320HP/11-90

X-Ray Tubes - MXR-320HP/11-90

Catalog excerpts

All COMET catalogs and technical brochures