PROFESSIONAL MEASURING EQUIPMENT
11Pages

Measuring Recording Online Monitoring Regulation Alarming Temperature Humidity Dew point Atmospheric pressure Analog signals Two-state inputs Pulses

Battery operated recorders and printers Battery operated recorders For more information visit www.cometsystem.com accurate measurement of - temperature - humidity - dew point - events nonvolatile memory for 32 000 values indication of alarm conditions via e-mail, SMS or visually software Comet Vision 2.0 for data analysis built-in printer (for selected models) communication interfaces - USB, RS232, GSM modem rugged design with protection up to IP67 battery life up to 7 years • accurate measurement of - temperature - humidity - dew point - current (4 - 20 mA) - voltage (0 - 5 V, 0 - 10 V) -...

Battery operated GSM modem Mobile Dataloggers Two buttons keypad for device control. Replaceable antenna. Large display for easier readabilitycurrent value, MIN/MAX value; alarm indication. For more information visit www.cometsystem.com accurate measurement of - temperature - humidity - dew point - events nonvolatile memory for 500 000 records indication of alarm via text massage, 3-colour LEDs, speaker easy to use software Comet Vision 2.0 for data analysis communication interfaces - USB-C snd GSM modem rugged design long battery life up to 6 years logger deployment down to -20°C Internal...

Handheld for measuring and recording Temperature and humidity probe. Inputs for up to two temperature probe Ni1000. Commeter with record - D0211 and D0221 can also measure together with Pt1000 probes. Temperature and humidity probe on a cable. USB port for easy connection to a PC (D series only). Measured values are displayed on a backlit display. The device can be set from the keypad. For more information visit www.cometsystem.com The measured values are stored in the internal nonvolatile memory for 16 000 records. m easuring and recording - temperature (probes Pt1000, Ni1000) - humidity -...

Battery operated 16 input-channel datalogger with Ethernet interface Temperature/relative humidity probe DigiL/M on the cable. Temperature/relative humidity probe DigiS/M. Alarm indication by LEDs or graphical display. Removable probe holder. Measured values are stored internally in non-volatile memory. Measured values are shown on the graphical screen with backlight option and the ability to change the size of displayed digits. Battery and mains power supply. For more information visit www.cometsystem.com The device can be set from the keypad. You can set a password to prevent unauthorized...

Variable 16 input-channel datalogger Monitoring system For more information visit www.cometsystem.com OUTPUT SIDE INPUT SIDE software configurable or modular inputs for - temperature sensors Pt and Ni - thermocouples and thermistors - voltage and current - two-state events - frequency and pulses - resistance - sensors with RS485 output memory for 500 000 records with automatic downloading to PC alarm indication via integrated siren, e-mail, SMS and two-state output to control other devices software for data analysis on PC communication interface USB, RS232, relays, RS485 (Modbus RTU),...

Internet of things sensors IoT-operated by Sigfox network RED For more information visit www.cometsystem.com Comet database viewer for data displaying on multiple PC accurate measurement of - temperature - humidity - barometric pressure - events cheap wireless communication for long distances indication of alarm via SMS easy to use database software for data analysis on PC data storage in the Comet cloude rugged design long battery life up to 5 years

Outputs 4 - 20 mA, 0 - 10 V, RS232, RS485 and relays Sensors and regulators Terminal for power and signal RS485/RS232 - for more details please see electrical wiring below on the page. LED signalization - visualization of binary inputs is done by three LED diodes. Other two diodes signed as ALARM 1 and 2 show alarm state and relay status. Relay - the device is equipped with two relay outputs for alarming or controlling of external devices. It is possible to assign any input value to each relay, to set comparing limit, delay, hysteresis, acoustic alarm or change its status by means of Modbus...

Sensors with Ethernet output Chart with historical value Graphs of actual values can also be displayed through a Web browser. You can display up to one thousand measured values. Remote controlling of relay via internet Current measured values and sensor settings can be accessed directly through the web interface from your web browser. Export measured value to file Web browser interface Current measured values are available on-line For more information visit www.cometsystem.com directly on a web browser from anywhere, all you need to do is enter the IP address. Alarms are indicated by a red...

Analytic and configuration software Storage place for all COMET devices COMET Database software ● download ● analyse ● present data ● print out reports Online display For more information visit www.cometsystem.com Device list and device panel One software for all COMET products Graphs by channels Compatible devices ● all dataloggers without printer ● Commeter ● Multilogger Recorded data 24 hours supervision unlimited data storage simple and clear access to your measured values single repository for all devices COMET alarm SMS texts and e-mails acoustic and visual sign

Measuring Recording Online Monitoring Regulation Alarming COMET SYSTEM, s.r.o. Bezrucova 2901 756 61 Roznov pod Radhostem CZECH REPUBLIC Tel: +420-571653990 Fax: +420-571653993 E-mail: info@cometsystem.com www.cometsystem.com Catalogue COMET - Professional measuting equipment 02/2018