Traceable calibration certificate from the manufacturer with traceability in accordance with EN ISO/IEC 17025 ing onitor nline m ocesses s•O r system control of p values d itoring te n el mon egulation a and two-sta chann R and -16 g• cordin ersal 1 analog • Univ ditions • Re and other 2 on ity, CO larm c eate a ture, humid • Cr pera of tem

Monitoring Systoms MS - m ode Is and variprions ETHERNET (OPTIONAL) Data loggers are designed for measurement, record, evaluation and consequent processing of input electrical signals, characterized by relatively slow changes (>1s). Together with proper transmitters and transducers are suitable for monitoring of physical values. Device enables: • to measure and process 1 to 16 input signals • to acquire autonomous time record of measured values • create alarm states • to perform other actions based on created alarms (audible, visual indication, controlling of relay outputs, sending SMS message,...

Alarms and Communication interfaces Recording and online monitoring of temperature and humidity, leaks and smoke in data centers and server rooms. Comet logger may be used in a wide range of applications, in clean and sterile environment as well as in the contaminated industrial environments. There is also the outdoor solution together with the watertight case. Below is an overview of some common applications. Measuring and recording system MS has been developed to meet all requirements for the possibility of alarming. Each of the 16 channels offers setting of hysteresis, a delay and up to four...

If you need more than 16 input channels Monitoring system MS may be configured for almost any desired measurement application. Sensors can be wired to datalogger in star-like connection as well as in serial. Combination of both is also possible. The monitoring system MS is characterized by a wide range of communication interfaces such as the RS232, RS485, USB, Ethernet and GSM or GPRS modem. Thanks to Wi-Fi routers several measuring systems MS can be wirelessly connected to a network. In the event that the number of 16 channels is insufficient, then it is possible to connect several units among...

Parameters of conf i gurable inputs MS6D Each Monitoring System contains 16 software configurable inputs from user PC. Also signals from sensors working on RS485 bus with ModBus or Advantech protocol can be recorded. RS485 input is available as optional accessory. Parameters of inputs MS55D The user can select the hardware modules to be fitted into the monitoring system MS. The modular design gives you the freedom to start with several input modules and to expand the system later on. Measured values Module types with source approximately 21V for two-wire transducers with current loop (e.g. temperature...

Analytical software SWR006 Clear presentation of measured data For a clear reading and processing the collected data is available user-friendly software which consists two parts - communication and analysis that allows you to work with spreadsheets and graphs. Software interface is intuitive and easy to use thanks to software wizard. It ensures easy operation even for beginner who starts working with monitoring system MS. Software is Compatible with Windows®. » clear presentation of measured data in tables » easy export to MsExcel® files or PDF » software allows to control all MS functions, settings...

Comet database Comet Database - system for data acquisition and analysis For users of monitoring system MS is available software solution for data collection to one central database. It is based on MS SQL or MySQL. Software system is suitable for users who want to analyze data from multiple loggers MS or other products of Comet System. Comet Database offers: When do you need Comet Database? » for 24 hours supervision » as the storage place for your data » for simple and clear access to your measured values » as the storage place for all devices Comet System » for alarm SMS texts and e-mails •...

Optional accessories for monitoring system MS GSM/Wi-Fi communication Sensors / transmitters / probes GPRS/EDGE router - MP052 Software Comet Database offers more tools for data management and alerts. Comet System produces wide range of sensors which are compatible with monitoring system MS. There exist two ways of connection and their combination. Analog Sensors with 4-20mA, 0-10V output are wired to datalogger in star-like connection and digital sensors with RS485 output are linked in serial. Router is intended for MS6D, MS6R, MS6-Rack and MS55D which are equipped with an Ethernet interface...

COMET SYSTEM, s.r.o. 1.maje 1220 756 61 Roznov pod Radhostem CZECH REPUBLIC Tel: +420-571653990 Fax: +420-571653993 E-mail: [email protected] Internet: www.cometsystem.cz GPS Location: 49°27'39.94"N 18°7'51.295"E