R-ISO-CHECK ISOLATION RESISTOR EMULATION

Product catalog summary

Overview: The R-ISO-CHECK is an adjustable 2-channel resistor card designed for isolation testing in high voltage areas. It is suitable for testing insulation monitoring systems and can be integrated into Battery Management Systems (BMS) or Electric Vehicle Supply Equipment (EVSE) test systems.

Specifications:

Communication: CAN bus at 500 kBd / 1 MBd.
Value Range: 20 kΩ to 65 MΩ over a voltage range of 1000 V.
Accuracy: +/-1%, 100 ppm/°C from 40 kΩ to 16 MΩ.
Resolution: 1 kΩ.
Channels per Board: 2 channels.
Electrical Isolation: 2 kV.
Voltage Measurement: Up to 1000 V with an accuracy of +/- 10%.

Features:

Bar graph display on the front panel for easy monitoring.
Self-protection mechanism for each channel.
Automatic detection of voltage range without influencing isolation.

Applications:

Perfect for testing insulation monitoring systems.
Can be used in conjunction with BMS and EVSE/EV test systems.
Supports automatic test processes and extended failure simulation.

Additional Information: The R-ISO-CHECK is part of a range of products offered by comemso GmbH, which includes solutions for battery cell emulation, sensor emulation, and more. For further details, brochures are available on their website or upon request.

Catalog excerpts

R-ISO-CHECK ISOLATION RESISTOR EMULATION-1

your partner for complex embedded solutions R-ISO-CHECK ISOLATION RESISTOR EMULATION Revision 3

Open the catalog to page 1

R-ISO-CHECK ISOLATION RESISTOR EMULATION-2

R-ISO-CHECK ISOLATION RESISTOR EMULATION Adjustable 2-channel resistor card for isolation testing in the high voltage area. Customized cases for your requirements Mixed casing with 14ch NTC/PTC simulation 4ch R-ISO check CAN + Automatic test process Electric control unit Perfect for testing insulation monitoring Technical data Communication: Value range: Accuracy: Resolution: Channels per board: Electrical isolation: Voltage ▶ up to 1000 V, accuracy +/- 10 % measurement: ▶ does not influence electrical isolation Bar graph display on front panel

Open the catalog to page 2

R-ISO-CHECK ISOLATION RESISTOR EMULATION-3

R-ISO-CHECK ISOLATION RESISTOR EMULATION Simulation of isolation resistor. R-ISO-Check CAN + Automatic test process ECU with isolation monitor Automatic detection of voltage range, measurement does not influence the isolation. Isolation resistor CAN + Automatic test process Automatic detection of voltage range, measurement does not influence the isolation. ECU with isolation monitor Isolation resistor

Open the catalog to page 3

R-ISO-CHECK ISOLATION RESISTOR EMULATION-4

NTC / PTC Sensor Emulation High precision Battery Cell Emulation Service (Electrics, Mechanics) Safety Mechanism EmergencySTOP Extended Failure Simulation Insulation monitoring Battery Management System (DUT) All solutions above are comemso products. Further information about the individual products can be found as a brochure at www.comemso.com or on request at [email protected]. One hardware, two applications. R-ISO-Check is the perfect complement of the test systems for BMS or EVSE/EV. BMS test system EVSE/EV test system R-ISO-Check with control fitting to the BMS test application R-ISO-Check...

Open the catalog to page 4

All Comemso electronics GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list