transmitters
1Pages

low-cost 2- or 3-wire smart low-cost 2-wire smart temperature transmitter transmitter with universal non-isolated / isolated input triple-isolated smart transmitter with universal input and output infrared temperature transmitter with digital display isolated smart RS485 transmitter with universal input loop-powered low-cost loop-powered signal isolator signal isolator with T/C linearization blocks universal 3-wire DC signal isolator low-cost 2-wire analog AC/DC transmitter for current transformers high-protected load-cell analog transmitter RTD: Pt100, Pt1000, PTC 1k, PTC 2k T/C: B, J, K, R, S, T linear: current, voltage, resistance RTD: Pt100, Pt1000, PTC 1k, PTC 2k T/C: B, J, K, R, S, T linear: current, voltage, resistance infrared thermocouple sensor RTD: Pt100, Pt1000, PTC 1k, PTC 2k T/C: B, J, K, R, S, T linear: current, voltage, resistance 4…20 mA externally powered loop; input voltage drop: < 2.6 V DC current, voltage, or resistance single load cell, 120...350 Ω temperature: -100…1800 °C 3.5…21 mA operating range 3.5…21 mA operating range (abs. max. 50 mA) linear: 0(4)…20 mA, (abs. max. 50 mA) 0...100 mV, 0...10 V, 0...1 kΩ within measurement error within measurement error within measurement error within measurement error within measurement error within measurement error within measurement error within measurement error within measurement error within measurement error Sensor Failure Reaction upscale or downscale, selectable "zero" and "span" trimpots soldering jumpers, "zero" and "span" trimpots through communication interface through communication interface through communication interface through communication interface "zero" and "span" trimpots "zero" and "span" trimpots "zero" and "span" trimpots Power Supply 3…36 VDC input loop, 8…32 VDC output loop passive: 3…36 VDC input loop, 8…32 VDC output loop active: 24 VDC ± 10% in-head, DIN-rail, or free in-head, DIN-rail, or free in-head, DIN-rail, or free in-head, DIN-rail, or free in-socket (DIN-rail) free (DIN-rail) in-socket, DIN-rail, or free free (DIN-rail) in-head case: ø44x19 mm in-head case: ø44x19 mm in-head case: ø44x19 mm DIN-rail case: 18x90x58 mm DIN-rail case: 18x90x58 mm box case: 80x80x60 mm box case: 80x80x60 mm box case: 80x80x60 mm in-head case: ø44x19 mm in-head case: ø44x23 mm 35x78x91 mm DIN-rail case: 18x90x58 mm DIN-rail case: 18x90x58 mm box case: 80x80x60 mm box case: 80x80x60 mm DIN-rail case: 18x75x60 mm DIN-rail case: 18x90x58 mm socket case: 35x78x91 mm socket case: 35x78x91 mm 77x82x58 mm box case: 80x80x60 mm box case: 80x80x60 mm DIN-rail case: 23x90x58 mm DIN-rail case: 35x110x58 mm without glands box case: 80x80x60 mm screw terminals screw terminals screw terminals, interface connector screw terminals, interface connector plug-in terminals screw terminals screw terminals for T/C inputs the output is proportional to T/C voltage 10 RTD, 12 T/C subranges; software: "TraCon", free; interface cable: for T/C inputs K1, K11U the output is proportional to T/C voltage programmable input/output conversion; software: "TraCon", free; interface cable: K1, K2, K11U, K12U software: "TraCon", free; software: "TraCon", free; interface cable: interface cable: K1(U), K2(U), K11U, K12U K2, K12U 7 selectable T/C linearization ranges: J (3 ranges) and K (4 ranges) negative output input over-voltage and over-current protection and custom specified non-linear conversions available available low-cost 2- or 3-wire analog low-cost 2-wire analog temperature transmitter transmitter with selectable input with fixed input RTD: Pt50…Pt1000, Cu50, Cu100 T/C: E, J, K, L, T, U linear: current, voltage 2-wire programmable RTD transmitter for in-head mounting screw terminals, interface connector 11-pin socket base, interface connector suitable software: "UniConf", free, for remote measurement; and "PolyMonitor" viewing angle: 7.3 °; infrared emission spectrum: 5...15 μm 4…20 mA externally powered loop; input voltage drop: > 2.6 V (passive), < 2.6 V (active) socket case: 11-pin socket base socket case:11-pin socket base screw terminals DIN-rail case: screw terminals DIN-rail case: plug-in terminals box case: screw terminals bare module suitable for installation for general inside current transformers weighing applications available