Air Monitoring Station AMoS

Product catalog summary

Overview: The Air Monitoring Station (AMoS) by Comde-Derenda GmbH is a versatile system designed for monitoring various air pollutants, including gases, fine dust, and volatile organic compounds (VOCs). It is suitable for both indoor and outdoor environments.

Specifications:

The system measures fine dust (PM2.5 and PM10) using a built-in air pollution monitor and sequential sampler for gravimetric evaluation.
It also measures ozone, carbon monoxide, sulphur dioxide, and nitrogen oxide.
Components are housed in a 19” rack, with optional air-conditioned housing for outdoor use.
Features include a PC-controlled system, adjustable measuring ranges, integrated vacuum and suction pumps, and remote operation capabilities.
Data storage and transmission are facilitated via Ethernet and UMTS/GPRS interfaces.

Technical Data:

Dust Sampling System: PM10 or PM2.5, gravimetric evaluation.
Ozone Measurement: UV Absorption, range 0 to 10 ppm, lower limit 0.4 ppb.
Carbon Monoxide Measurement: NDIR principle, range 0 to 200 ppm, lower limit 0.05 ppm.
Sulphur Dioxide Measurement: UV fluorescence, range 0 to 10 ppm, lower limit 1 ppb.
Nitrogen Oxide Measurement: CLD chemo luminescence, range 0 to 20 ppm, lower limit 0.4 ppb.
Interfaces: RS-232, RS-485, Ethernet, USB.
Power Supply: 230 V, 50/60 Hz, consumption approx. 500 VA.
Dimensions: Width 553 mm, Height 1570 mm, Depth 600 mm, Weight approx. 102 kg.
Noise Level: < 45 dB(A) according to VDI 2058.
IP Classification: IP 55.

Additional Features:

Customized modular design with minimal space requirements.
Calibration and zero-point adjustment via valves.
Integrated zero gas conditioning and data storage.

Note: Comde-Derenda GmbH reserves the right to change specifications, design, or materials without notice.

Catalog excerpts

Environmental Monitoring SystemsAir Monitoring Station for 7 Immission Values Type: AMoSThe Air Monitoring Station AMoS is a universal measuring system for the determination of gases, fine dust and volatile organic compounds (VOCs) The air monitoring station is used for the indoor and outdoor monitoring of immission values. Fine dust PM2,5 and PM10 concentrations are monitored by a built-in air pollution monitor. A built-in sequential sampler collects fine dust PM2,5 or PM10 for gravimetric evaluation. The station also measures the air components ozone, carbon monoxide, sulphur dioxide and nitrogen oxide. The system components are installed in a 19” rack, together with a vacuum pump, a suction pump and a control unit. For outdoor use, the system can be delivered with an optional air-conditioned housing. ■ Customized modular design ■ Minimal space requirements ■ PC-controlled system with interactive menu ■ Adjustable measuring ranges ■ Gas collection unit for gas absorption tubes (up to 4 channels) ■ Integrated vacuum pump and suction pump ■ Calibration and zero-point adjustment via valves ■ Integrated zero gas conditioning ■ Remote controlled operation and maintenance ■ Integrated data storage ■ Data transmission via UMTS/GPRS • Ozone generator with filter Comde-Derenda GmbH Kieler Strasse 9, 14532 Stahnsdorf / Germany [email protected] www.comde-derenda.de

Open the catalog to page 1

COMDE DERENDA Technical Data Air Monitoring Station Type AMoS Determination of following measuring values: Dust sampling system PNS 16MT3.1: Air pollution monitor APM-2: (see seperate data sheet APM-2) Ozone (optional): Measuring principle: Measuring range: Lower detectable limit: Carbon monoxide (optional): Measuring principle: Measuring range: Lower detectable limit: Sulphur dioxide (optional): Measuring principle: Measuring range: Lower detectable limit: Nitrogen oxide (optional): Measuring principle: Measuring range: Lower detectable limit: Interface: Power supply: Power consumption: Dimensions: Width: Height: Depth: Weight: Noise...

Open the catalog to page 2

Air Monitoring Station AMoS

Air Monitoring Station AMoS

Catalog excerpts

All Comde-Derenda GmbH catalogs and technical brochures