LOW INTENSITY OBSTRUCTION LIGHT LXS-ONE
3Pages

{{requestButtons}}

Catalog excerpts

LOW INTENSITY OBSTRUCTION LIGHT LXS-ONE - 1

LOW INTENSITY OBSTRUCTION LIGHT LXS-ONE As specified by Annex 14 of ICAO regulation, Low Intensity Obstruction Lights (LIOL) should be used to warn the presence of obstacles up to 45m height, such as telecommunication towers, wind turbines, chimneys, cranes, buildings and other structures. Low Intensity Obstruction Lights are the simplest devices according to ICAO standards and they have the following characteristics and uses: • LIOL, Type A (intensity >10cd, red steady burning) can be used alone; • LIOL, Type B (intensity >32cd, red steady burning), can be used either alone or in combination with medium intensity obstacle lights Type B, Type AB or with high intensity obstacle lights Type AB; lxs@luxsolar.com - www.luxsolar.com - Ph. +39.0341.260926 - Combustion and Energy SRL Drawings, photos and contents of this document are for informational purposes only and subject to change without any notice.

Open the catalog to page 1
LOW INTENSITY OBSTRUCTION LIGHT LXS-ONE - 2

LOW INTENSITY LXS-ONE-A/LXS-ONE-B Stabilised light output: LIOL-A: >10cd LIOL-B: >32cd PMMA lens EDPM gasket Anodised aluminium body Cable Gland: M12x½ Beacon support bracket LUXSOLAR L810-LXS-ONE Low Intensity Obstruction Light is compliant to ICAO (Low Intensity - Type A or B), FAA (Type L-810) and EASA certified. With an ultra low-weight (less than 300gr) and smallest body for an obstruction light device, high quality and ultra-bright mono-LED, optical PMMA lens for an optimum beam spread, LUXSOLAR LIOL-A/B LXS-ONE product is your best choice for an efficient, long life and reliable...

Open the catalog to page 2
LOW INTENSITY OBSTRUCTION LIGHT LXS-ONE - 3

LOW INTENSITY LXS-ONE-A and LXS-ONE-B TECHNICAL SPECIFICATIONS OPTICAL FEATURES • • • • • • • • Based on LED technology RED light - Steady Burning LIOL-A: >10 cd LIOL-B: >32 cd Peak intensity: @5° Horizontal beam radiation 360° Vertical beam spread >10° PMMA lens PMMA dome and lens Anodised aluminium body EPDM gasket SS304 Beacon support bracket Degree of protection: IP66 Operating temperature: -20°C to +60°C Dimension (Øxh): 68x60mm Lamp unit weight: 260gr Radio and television tower Wind turbine Wind mast measurement Radar Antenna ICAO/EASA test report (EN17025 laboratory) nr....

Open the catalog to page 3

All Luxsolar catalogs and technical brochures