HIGH INTENSITY OBSTRUCTION LIGHT
4Pages

HIGH INTENSITY HIGH INTENSITY OBSTRUCTION LIGHT According to Annex 14 of ICAO regulations, High Intensity Obstruction Lights (HIOL) should be used to warn the presence of obstacles with an height above 150m or when an aeronautical study indicates such lights as mandatory for the correct warning of an elevated structure, such as chimneys, cranes, buildings, bridges, high tension pylons and other buildings. High Intensity Obstruction Lights include two type of beacons, with different charactertistics and uses: • HIOL Type A (intensity 200.000cd, day-mode white flashing; 20.000cd, twilight-mode white flashing; 2.000cd, night-mode white flashing), mainly used on skyscrapers, bridges, etc; • HIOL Type B (intensity 100.000cd, day-mode white flashing; 20.000cd, twilight-mode white flashing; 2.000cd, night-mode white flashing), mainly used on high voltage pylons where is not practicable install cable markers. LUXSOLAR offers to its customers also DUAL type beacons in the same light fixture, suitable to be used during the day (with white LEDs) and during the night (with red LEDs); these beacons are: • DUAL HIOL Type AB (intensity 200.000cd, day-mode white flashing; 20.000cd, twilight-mode white flashing; 2.000cd, night-mode red flashing) should be used in combination with Low Intensity Obstacle Lights, Type B; • DUAL HIOL Type AC (intensity 200.000cd, day-mode white flashing; 20.000cd, twilight-mode white flashing; 2.000cd, night-mode red steady burning) should be used in combination with Medium Intensity Obstacle Lights, Type C. lxs@luxsolar.com - www.luxsolar.com - Ph. +39.0341.260926 - Combustion and Energy SRL Drawings, photos and contents of this document are for informational purposes only and subject to change without any notice.

Anodised aluminium body Optimized optical lens Anti-condensation Gore-Tex valve Borosilicate glass cover protection Catenary and simultaneous flash synchronization Stabilised light output: 200.000cd day mode 20.000cd twilight mode 2.000cd night mode Infrared version* (for Red LEDs) NOTE: electronic beacon driver in a separate enclosure *as option IP66 LUXSOLAR L856-LXS-RUG High Intensity Obstruction Light is compliant to ICAO (High Intensity - Type A and Type AB/AC) and FAA (Type L-856). With a body designed for optimum light emission and increased cooling, high quality and ultra-bright...

HIGH INTENSITY HIOL-A 120° and HIOL-AB/AC 120° (LXS-RUG) TECHNICAL SPECIFICATIONS OPTICAL FEATURES • • ELECTRICAL FEATURES • Based on LED technology WHITE light - HIOL A § 200.000cd day mode § 20.000cd twilight mode § 2.000cd night mode WHITE/RED light - HIOL AB/AC § 200.000cd day mode § 20.000cd twilight mode § 2.000cd night mode Cd emission @ -0,5° and +4° Horizontal beam radiation: 120° Vertical beam spread: +3 / +7° PMMA lens MECHANICAL FEATURES • • • • • • • • Electronic components installed inside separate LUXSOLAR controller Average power consumption LXS-RUG 120° @40fpm: § Day mode:...

HIGH INTENSITY Vertical Angle L856-LXS-RUG average emission level at 70°C ambient temperature ICAO ANNEX 14 high intensity - Min. Required Intensity ICAO ANNEX 14 high intensity - Max. Required Intensity HIOL-A 120° (LXS-RUG) FRONT VIEW REAR VIEW SIDE VIEW HIOL-AB/AC 120° (LXS-RUG) FRONT VIEW SIDE VIEW REAR VIEW lxs@luxsolar.com - www.luxsolar.com - Ph. +39.0341.260926 - Combustion and Energy SRL Drawings, photos and contents of this document are for informational purposes only and subject to change without any notice.