HIGH INTENSITY OBSTRUCTION LIGHT CAP168
4Pages

HIGH INTENSITY HIGH INTENSITY OBSTRUCTION LIGHT CAP168 According to CAP 168, the High Intensity Obstruction Lights – Type A - are used on obstacles whose height above the level of the surrounding ground exceeds 150m when an aeronautical study indicates than medium intensity obstruction light - Type Care not enough to properly warn the obstruction pilots. High intensity lights, Types A has sufficient intensity to meet the most demanding day-time requirements. The intensity setting for twilight and night provide appropriate lower levels of output. When specifying this type of light, it is necessary not only to consider the operational requirement of high intensity but also to consider the size and weight of the equipment. Where as other types of lighting have an horizontal coverage of 360°, high intensity lighting usually consist of units having an horizontal coverage of approximately 120°. It is therefore necessary to install a number of units at each corner of the structure to obtain all-round coverage. lxs@luxsolar.com - www.luxsolar.com - Ph. +39.0341.260926 - Combustion and Energy SRL Drawings, photos and contents of this document are for informational purposes only and subject to change without any notice.

HIGH INTENSITY HIOL-A 60°/120°/180° CAP168 Anodised aluminium body Borosilicate glass cover protection Based on LED technology White flashing (HIOL-A) White/red flashing (HIOL-AB) White flashing and RED steady (HIOL-AC) Catenary and simultaneous flash synchronization Stabilised light output: 200.000cd day mode 20.000cd twilight mode 2.000cd night mode Optimized optical lens Anti-condensation Gore-Tex valve Infrared version* (for Red LEDs) note: electronic beacon driver in a separate enclosure LUXSOLAR L856-LXS-RUG High Intensity Obstruction Light is compliant to ICAO (High Intensity -...

HIGH INTENSITY HIOL-A 60°/120°/180° (LXS-RUG) TECHNICAL SPECIFICATIONS OPTICAL FEATURES • • ELECTRICAL FEATURES • Based on LED technology WHITE light - HIOL A § 200.000cd day mode § 20.000cd twilight mode § 2.000cd night mode Cd emission @ -0,5° and +4° Horizontal beam radiation: 60° or 120° or 180° Vertical beam spread: +3 / +7° PMMA lens MECHANICAL FEATURES • • • • • • • • Anodised aluminium body with heat-sink pins for maximum heat dissipation Terminal JB for connection in Glass Reinforced Polyester (GRP), black colour Borosilicate glass cover protection Degree of protection: IP66...

HIGH INTENSITY Vertical Angle L856-LXS-A average emission level at 70°C ambient temperature ICAO ANNEX 14 high intensity Type A - Min. Required Intensity ICAO ANNEX 14 high intensity Type A - Max. Required Intensity HIOL-A HIOL-A 120° (LXS-RUG) 120° (LXS-RUG) HIOL-A 120° (LXS-RUG) HIOL-A 120° (LXS-RUG) 120° (LXS-RUG) HIOL-A REAR VIEW SIDE VIEW FRONT VIEW SIDE VIEW HIOL-A 60° (LXS-RUG) 60° (LX HIOL-A FRONT VIEW HIOL-A 60° (LXS-RUG) HIOL-A 60° (LXS-RUG) HIOL-A 60° (LX REAR VIEW lxs@luxsolar.com - www.luxsolar.com - Ph. +39.0341.260926 - Combustion and Energy SRL Drawings, photos and contents...