POWER POST Quick, strong and versatile friction safety post for edge protection in concrete construction. friction post offering safety,

POWER POST New COMBISAFE POWER POST fixes between concrete floors and soffits without anchors to provide safe and rapid installation of edge protection. Its unique compression unit applies a force of up to 7.0 kN, providing EN 13374 compliant performance and easy fitting and adjustment even with double height steel mesh barriers in place. unique features: n Friction only installation provides 7.0 kN compression force for secure mounting of double height barriers n Easy compression adjustment, even with barriers or netting in place n Quick height adjustment up to 3.5 m maximum, or 4.2 m using...

Fixings and system components POWER POST – 11240, 17 Kg Designed to provide easy access to the compression unit nut, allowing compression to be adjusted as the slab starts to relax. The load indicator is clearly visible through the mesh barrier and for added safety, the compression thread is protected by a steel tube, which also acts as a carrying handle. Easy height adjustment with a simple, quick release pin. POWER POST Floor Grip – 11226, 1 Kg A hardened steel claw grip to provide additional security against slipping. Soffit Grip – 11014, 1 Kg Soffit Grip’s three spikes exert a firm grip to...

POWER POST Extension – 11415, 3.1 Kg Extends the reach of the POWER POST from 3.5 meters up to 4.2 meters without compromising performance. Installing POWER POST Choose slab fixing method (friction or mechanical anchor) and fit appropriate foot and soffit grip. Take out quick release pin and raiseup post to just below soffit. Re-insert pin to hold position. Level using the Level Indicator, then use powered impact wrench with socket driver to extend post until load indicator shows full compression. Install Steel Mesh Barrier (SMB) Holders (plus upper holder if required). Fit SMB with toe-board...