0013_01_UK©2010 Combisafe International Ltd. Reservation for technical changes. Containment Solutions Combisafe International Ltd Safety Centre, Cheaney Drive, Grange Park, Northampton NN4 5FB Tel: +44 (0)1604 660600 | Fax: 44 (0)1604 662960 | Email: [email protected] | Web: www.combisafe.com New solutions and developments of existing systems to increase edge protection and level of containment.

The Solutions – Registered Design and Patent Pending Containment Solutions The Steel Mesh Barrier (SMB) Containment Solution As building heights grow and construction programmes shorten, the risk of equipment, people, and materials falling, or being blown out of a partially complete building, increases. This has led to a rising demand for floor to soffit ‘containment‘ as part of the edge protection solution. Uses existing SMB components to cover the containment area. Post extensions, adapters, and specially sized SMB Holders are combined with existing products to provide a certain containment...

Installation Example Standard edge protection using the safety post, Remove the cap from the top of the post, SMB, SMB Holder Maxi and suitable attachment. and insert the Safety Load Indicator. Insert the Compression Thread Post into Insert the extension post, placing the the Safety Load Indicator. Soffit Grip on the top and fix onto the Compression Thread. Tension Wrench Using the ergonomically-designed Tension Wrench, tighten the butterfly wing nut until the correct compression of the post has been achieved, as indicated by the Safety Load Indicator. Safety Load Indicator The Safety Load Indicator...

Special Features SMB and Soft Net Installation The Reach Hook is used for lifting SMBs, Make Up Barriers or Soft Nets in position in the different systems. The Reach Hook is adjustable in length to enable safe installation without the need to work at height. The simple but clever hook ensures lifting is done safely with an ON/OFF function. Equipped with Wrist Tool Holder. Soft Net Design The end plugs on the tubes of the Soft Safety Nets are designed for quick and easy installation. The plug design also prevents the net from sliding out during use. To remove, the net needs to be lifted and slid...

Standard Products COMBISAFE Containment Solutions are based on standard components within the Combisafe product range, together with specially-designed accessories. This makes it possible to combine edge protection solutions with Containment Solutions. The edge protection can be erected on the floor before the soffit is built. When a Containment Solution is needed, it can easily be added. More information about the existing range of Combisafe products and systems is available in the Combisafe Handbook. Net Tube Holder Soffit Grip, art.no 11027 This product is used with the Soft Net Solution....

If a system has a 2.4m c/c post spacing and height of 3.5m from floor to soffit, the windload for each post will be: For a completely covered system, Cp=0, the design load (including load factor) will be 15 kN (1500 kg) Wind loads For a net or fencing that is 50x50 with a 5mm cord, Cp=50, the design load (including load factor) will be 2.9 kN (290 kg) Testing The systems have been tested in many different configurations. Examples left above show static wind loads in nets, static wind loads on the Post, and dynamic tests. Containment Standard explains and emphasises all different variables within...