Containment
6Pages

Comber Process Technology S.r.l. Tel.: + 39 02 99990146 Fax: + 39 02 99990148 info@comber.it Via Garibaldi 67 I - 20061 Carugate (MI) www.comber.it Containment - Systems Active or Passive to 50 ng/m³ TWA TI 0230 E - 05/08

Comber Process Technology S.r.l. Tel.: + 39 02 99990146 Fax: + 39 02 99990148 info@comber.it Via Garibaldi 67 I - 20061 Carugate (MI) www.comber.it Pressofiltro® Containment Devices Containment devices (Glove boxes) allow for contained sampling, product discharge and pack-off into lined drums or other containers, heel removal for total product recovery as well as filter cloth disposal while fully protecting the operating personnel and at the same time preventing contamination of the product. The isolator is installed on the filter dryer using an adaptor flange around a discharge plug....

Comber Process Technology S.r.l. Tel.: + 39 02 99990146 Fax: + 39 02 99990148 info@comber.it Via Garibaldi 67 I - 20061 Carugate (MI) www.comber.it Pressofiltro® Containment Devices Single chamber passive isolator for sampling, product discharge, pack-off and heel removal installed on a Pressofiltro® PF 200 with 0.32 m² filtration area. With open glove port barrier, opened front door and discharge plug of the filterdryer open. For pack-off this isolator is equipped with a vented barrel adaptor with inflatable seal and a manually operated butterfly valve. A 105 mm RTP is installed to move...

Comber Process Technology S.r.l. Tel.: + 39 02 99990146 Fax: + 39 02 99990148 info@comber.it Via Garibaldi 67 I - 20061 Carugate (MI) www.comber.it Pressofiltro® Containment Devices Right, single chamber active isolator for sampling and heel removal installed on a Pressofiltro® PF 500 with 0.70 m² filtration area. Product is discharged through the filter dryer discharge valve on the vessel side opposite from the isolator. Initially, most of the product is discharged using the agitator of the filter dryer. Remaining heel is then pushed towards the discharge valve using a rake with the...

Comber Process Technology S.r.l. Tel.: + 39 02 99990146 Fax: + 39 02 99990148 info@comber.it Via Garibaldi 67 I - 20061 Carugate (MI) www.comber.it Pressofiltro® Containment Devices Multiple chamber active isolators are typically employed for the most stringent containment requirements. Sampling, product discharge and pack-off, heel removal and filter cloth disposal are all performed within the isolator and thus in total containment. Pack-off is typically using continuous liner, mills or/and weigh scales are often installed within the isolator chamber as well. Left and centre, two designs...

Comber Process Technology S.r.l. Tel.: + 39 02 99990146 Fax: + 39 02 99990148 Via Garibaldi 67 I - 20061 Carugate (MI) info@comber.it www.comber.it Pressofiltro® PF 20 Filter Dryer Left: Isolator front Upper right: Filter before installation into Isolator Lower right: Side view Pressofiltro® PF 20, installed in a multiple chamber isolator. Separate chambers are available within the isolator for a reactor, solvent containers, filterdryer, pack-off and discharge. The upper and lower sections of the filterdryer vessel are installed within the isolator. The lower filterdryer vessel section can...