directional control valve
12Pages

Quick Reference Cartridge Valves Technical Information Directional control valves DCV 05 Directional control valves DCV05 DCV 05 directional control valves consist of: housing (1), control spool (5), centering springs (4), and operating solenoids (2, 3). The three-position directional valves have two solenoids and two springs. The two position directional valves have one solenoid and one return spring. The operating solenoids are DC and are supplied through connectors A and B (6, 7). For AC supply, the solenoids are provided with rectifiers integrated directly into the coil. T The connectors must be ordered separately. By loosening nut (8), the solenoid can be rotated in four positions 90° apart. Provided that the pressure in T-port does not exceed 360 psi [25 bar], the valve can be actuated by manual override (9). The valve housing (1) is phosphate coated. The operating solenoids (2, 3) are zinc coated. 3 position, 4-way and 2 position, 4way directional valves Solenoids can be fixed in three positions 90° apart Push button manual override HK.66.U1.02 © Danfoss Fluid Power 03/99

r~m-mm^-B-wmmM Cartridge Valves Technical Information E?l LOWTlEtCr"ft ^ . . . . nrwnc 111 COMPLIANT RESPONSIVENESS IN MOTION uirectionai control vaives ULV US MEMBER OF THE SAUER-DANFOSS GROUF TECHNICAL DATA

Quick Reference Cartridge Valves Technical Information Directional control valves DCV 05 p - Q Characteristics Measured at viscosity = 32 mm2/s (cSt) [156 SUS]. bar Directional control valves DCV05 Pressure loss CHARACTERISTICS (continued)

Quick Reference Cartridge Valves Technical Information Directional control valves DCV 05 ORDER CODE Seals Code Description B Buna-N V Viton Nominal size Operating positions Spool speed control orifice Code Description Two positions Directional control valves DCV05 Three positions Code Omit See Spool options, page 5 The AC coils correspond with E5 connectors only. Nozzle 0.6mm [0.024 in] Throttle screw Manual override Code 00 N2 Description Standard Protective rubber boot Description DIN 43650 DIN 43650 diode in coil DIN 43650 rectifier in coil Lead wires Lead wires with diode in coil...

MEMBER OF THE SAUER-DANFOSS GROUP Cartridge Valves Technical Information Directional control valves DCV05 SPOOL OPTIONS Functional Symbols * standard spool option.

Cartridge Valves Technical Information Directional control valves DCV 05 TERMINAL OPTIONS Directional control valves DCV05 Quick Reference

Quick Reference Cartridge Valves Technical Information Directional control valves DCV 05 Without rectifier Without rectifier MANUAL OVERIDE OPTION Directional control valves DCV05 CONNECTOR OPTIONS Manual overide covered by coil nut SPOOL SPEED CONTROL ORIFICE OPTION Throttle screw Code T2 Dimensional sketch Code T3 Dimensional sketch Internal hex 5 A/F

Quick Reference Cartridge Valves Technical Information Directional control valves DCV 05 Directional control valves DCV05 Solenoid a Solenoid b Manual override Name plate Square ring (5 pcs) supplied in delivery packet 4 mounting holes Coil nut. Connector plug [DIN 43650] Distance required to remove plug 24.6 [0.969]

Quick Reference Cartridge Valves Technical Information Directional control valves DCV 05 Valve with one solenoid - side a Directional control valves DCV05 DIMENSIONS (continued) Valve with one solenoid – side b Required surface finish of interface

Quick Reference Cartridge Valves Technical Information Directional control valves DCV 05 REPLACEMENT PARTS Solenoid coil Nut + sealing ring Connector plug Set of sealing mounting bolts Directional control valves DCV05 Solenoid Voltage E9 Lead E10 Deutsch Wires w/ on Leads Diode Ordering Number *** 158-8102 *** *** *** Consult Factory E11 Deutsch on Leads w/Diode

Quick Reference Cartridge Valves Technical Information Directional control valves DCV 05 Solenoid nut Manual override Code No Code N1 Type of nut Standard nut Nut with rubber cap Ordering number 158-8068 Consult factory Connector plug A Connector plug B gray black Ordering number 158-8076 158-8075 Consult factory Directional control valves DCV05 REPLACEMENT PARTS (continued) Consult factory Ordering number Mounting bolts – set Type Ordering number

Cartridge Valves Technical Information Directional control valves DCV 05 Notes Directional control valves DCV05 17.12 Quick Reference