Coils Catalog

Coils Catalog Quick reference CL - Coils Quick Reference

Coils Catalog Quick reference CL - Coils Quick Reference

Coils Catalog Quick reference CL - Coils Quick Reference Valve Tube Outer Diameter Coil Type 0.500 inch 0.625 inch 13 mm 16 mm 19 mm 0.875 inch 0.875 inch 13 mm 16 mm 16mm 19 mm (proportional) Standard Standard Standard Standard Standard Robust Robust Robust Robust Robust Robust Unidirectional Unidirectional X Bi-directional Bi-directional Bi-directional 110 / 220 VAC Internally Rectified Internally Rectified External Rectifier Needed External Rectifier Needed External Rectifier Needed

Coils Catalog Application notes COIL TERMINATION SPECIFICATIONS CL - Coils Application Notes Comatrol coils can be ordered with fully encapsulated diodes. Diodes are used in electrical circuits to protect delicate downstream electronic components from power surges originating from the coil. Comatrol standard coils employ uni-directional, polarity diodes. This means the installer must be careful not to reverse the “+” and “–“ terminals. If this should happen, the electrical current will destroy the diode and render the coil unusable. Comatrol coils have a “1” and “2” molded in the connector for...

Coils Catalog Application notes COIL TERMINATION SPECIFICATIONS (continued) Code E9 E10 E11 E12 E13 FL & FL600 FLD H L M2 CL - Coils Application Notes Termination Lead wires with diode Deutsch (on leads) Deutsch (on leads) with diode Deutsch Deutsch with diode Flying leads Flying leads with diode DIN 43650 Lead Wires Metri-Pak 150 Type 1 (also conforms to Amp SuperSeal 1.5) Metri-Pak 150 Type 2 Dual Spade Single Spade Dual Spade (M13 & M16 coils) Single Post (D08 & D10 coils) Weatherpack Female Weatherpack Male Weatherpack Male with diode Specifications Two 18 AWG wires, 457 mm [18 in] long On...

ELECTRICAL SPECIFICATIONS Duty cycle rating: 100% at 133% of rated voltage Magnet wire insulation: (200°C ) Ambient temperature: -30 to 60 °C [-22 to 140 °F] Diodes are available; contact your Comatrol representative. Environmental protection: IP65 All AC coils are internally rectified 16 watt coils Voltage (V) Resistance (Ohms) @ 20 °C [68 °F] Current draw (A) @ 20 °C [68 °F] Color Part numbers Amp Junior Timer Code AJD Part numbers Part numbers TERMINALS Amp Junior Timer Code AJ

TERMINALS (continued) Part numbers Lead wires Code L Part numbers MetriPak 150 Type 1 Code M2 Part numbers Voltage (V) 10 VDC 12 VDC 20 VDC 24 VDC

Camatr^i ^Catalog Member of the Danfoss Croup Part numbers

Duty cycle rating: 100% at 133% of rated voltage Magnet wire insulation: (200°C ) Ambient temperature: -30 to 90 °C [-22 to 194 °F] Diodes are available; contact your Comatrol representative. Environmental protection: IP65 All AC coils are internally rectified Maximum Operating Limit Percent Rated Voltage ELECTRICAL SPECIFICATIONS 16 watt coils Voltage (V) Resistance (Ohms) @ 20 °C [68 °F] Current draw (A) at 25 °C [68 °F] Color 30 watt coils Voltage (V) Resistance (Ohms) @ 20 °C [68 °F] Current draw (A) @ 20 °C [68 °F] Color Part numbers Part numbers Deutsch w/diode Code DED

Part numbers Din (43650 connector ) Lead wires Code L Part numbers Two 18 awg leads extending 457.2 mm [18 in] min MetriPak 150 Type 1 Code M2 Part numbers TERMINALS (continued)

TERMINALS (continued) Dual Spade Code S 14.25 [0.561] M3-0.5 threaded insert 6.4 [0.25] minimum good thread 16.94 [0.667] 5.79 [0.228]

Ambient temperature versus % rated voltage Min pull-in voltage 30 watt coils Voltage (V) Resistance (Ohms) @ 20 °C [68 °F] Current draw (A) @ 20 °C [68 °F] Color Part numbers Part numbers ELECTRICAL SPECIFICATIONS Duty cycle rating: 100% at 133% of rated voltage and 50°C [122°F] Magnet wire insulation: (200°C) Ambient temperature: -40 to 50 °C [-40 to 112 °F] Diodes are available; contact your Comatrol representative. Environmental protection: IP69K: DE and L connectors IP67: AJ, M2, and M3 connectors IP65: all other connectors

TERMINALS (continued) Part numbers Lead wires Code L Metripak 150, type 1 Code M2 Part numbers

MetriPak 150, Type 2 Code M3 Part numbers Dual Spade Code S Part numbers TERMINALS (continued)

ELECTRICAL SPECIFICATIONS Magnet wire insulation: (200°C) Maximum continuous current 1.8 A (at 12 V) 0.9 A (at 24 V) Ambient temperature: -40 to 50 °C [-40 to 122 °F] Environmental protection: IP69K: DE and FL connectors IP67: AJ and AS connectors IP65: all other connectors Used primarily on proportional valves 35 watt coils Voltage (V) Resistance (Ohms) @ 20 °C [68 °F] Current draw (A) @ 20 °C [68 °F] Color Part numbers Amp SuperSeal 1.5/MetriPak 150 Type 1 Code AS 40.4 [1.59] Part numbers Voltage (V) 12 VDC 24 VDC

TERMINALS (continued) Part numbers Part numbers Voltage (V) 12 VDC 24 VDC Lead wires Code FL

Member of the Donfoss Group Duty cycle: 100% at 115% of rated voltage Magnet wire insulation: (200°C) Ambient temperature range: -20 to 40 °C Environmental protection rating: Input voltage range: 85% to 115% of rated voltage Optional bi-directional transient voltage suppression diodes: Non polarity dependent, 51 volt nominal breakdown

Member of the Danfoa Group Part numbers

• • • • ELECTRICAL SPECIFICATIONS Duty cycle: 100% at 115% of rated voltage at 40°C [104°F] Magnet wire insulation: (200°C) Ambient temperature range: -20 to 40 °C [-4 to 104 °F] Environmental protection rating: IP69K: DE IP67: AJ , AS, and M3 term IP65: FL and DN Input voltage range: 85% to 115% of rated voltage Temperature rise at 115% of rated voltage: 130°C [266°F] above ambient AC coils require external rectifier Weight: 0.2 kg [0.44 lb] M13 20 watt Coil Minimum Pull-in Voltage Continuous Operating Limit 100 110 120 Percent Rated Voltage 20 watt coils Voltage (V) 10 VDC Resistance (Ohms)...

TERMINALS (continued) Amp SuperSeal 1.5/MetriPak 150 Type 1 Code AS 64.9 [2.55] Part numbers Voltage (V) 10 VDC 12 VDC 20 VDC 24 VDC Part numbers Voltage (V) 10 VDC 12 VDC 20 VDC 24 VDC Part numbers Voltage (V) 10 VDC 12 VDC 20 VDC 24 VDC Deutsch w/diode Code DED Part numbers Voltage (V) 10 VDC 12 VDC 20 VDC 24 VDC Amp SuperSeal 1.5/MetriPak 150 Type 1 w/diode Code ASD