Member of the Danfoss Group

Accessories Catalog Quick reference AC - Accessories Quick Reference AC - 2

Cam&tir ^l Accessories Cata|°g HespamsivEniEss im MOTION CPF20-3 Cavity Filter Member of the Confess Group This is a filter that fits into a standard cartridge cavity (SDC20-3) Not recommended as a substitute for hydraulic system filters. Other housings available - Filter mesh Plug option Omit = Filter only

Accessories Catalog CP600-5 Hand Pump This is a manually operated uni-directional pump. These small displacement hand pumps are used typically for piloting the operation of small hydraulic cylinders or valves. These pumps can be mounted inline using the standard housing or in custom HICs. For smooth operation, inlet lines should not be excessively long, and the vertical distance between pump and tank level no more than 300 mm (12 inch). Pressure rating Displacement Leakage Weight Cavity 1.2 cu. cm [0.07 cu. in.]/stroke 6 drops/min @ Rated pressure 0.24 kg [0.52 lbs] SDC 10-2 Pump force PERFORMANCE...

Accessories Catalog CP602-5 Hand Pump This is a manually operated uni-directional pump. These small displacement hand pumps are used typically for piloting the operation of small hydraulic cylinders or valves. These pumps can be mounted inline using the standard housing or in custom HICs. For smooth operation, inlet lines should not be excessively long, and the vertical distance between pump and tank level no more than 300 mm (12 inch). Pressure rating Displacement Leakage Cavity 207 bar [3000 psi] 9.2 cm³ [0.56 in³] / stroke 6 drops/ minute @ Rated pressure SDC16-2 Force Input Force vs Output...

Accessories Catalog 120662 Handle Kit Installation Drawing 31.8 [1.25] Cavity C.L.To Mounting Bolt C.L. 3/8 - 24UNF -2A THD. Min. Depth 16.3 [0.63] at location Shown ORDERING INFORMATION To order, request part number 120662—handle kit

Accessories Catalog MP 06 Hand Pumps This is a manually operated uni-directional pump. These small displacement hand pumps are used typically for piloting the operation of small hydraulic cylinders or valves. These pumps can be mounted inline using the standard housing or in custom HICs. For smooth operation, inlet lines should not be excessively long, and the vertical distance between pump and tank level no more than 300 mm (12 inch). These pumps can work in outdoor applications if the ambient air is not contaminated by powder and dust. Size 06 0.94 [0.057] 315 bar Max. pressure [psi] [4569]...

rnFTWaTrml Accessories Catalog Member cf the Danfoa Group Standard housing

Accessories Catalog MP 12 Hand Pumps This is a manually operated uni-directional pump. These small displacement hand pumps are used typically for piloting the operation of small hydraulic cylinders or valves. These pumps can be mounted inline using the standard housing or in custom HICs. For smooth operation, inlet lines should not be excessively long, and the vertical distance between pump and tank level no more than 300 mm (12 inch). These pumps can work in outdoor applications if the ambient air is not contaminated by powder and dust. Size Displacement Per Stroke Max. pressure NCS Cavity Max...

Member cf the Danfoa Group - Standard housing

Accessories Catalog DIN Connectors Standard connector for use with DC input. Type A Order no. 088010080 Full wave bridge rectifier with 4 diodes and VDR protecting the a.c. side against overvoltage from electrical power supply. Type C Order no. 088010060 With diode blocking overvoltage on opening. Type E Order no. 088010410 Standard connector to Kostal patern, for use with DC input. Type K Order no. 088010350 For details of use, see technical data relevant to the individual solenoid valves. All connector are supplied unassembled. Connectors with indicator lights are available on request (Consult...

Accessories Catalog Pilot Pistons Pilot pistons used with check valve cartridges are an economical way to create pilotoperated check valve functions in custom Hydraulic Integrated Circuits (HIC). Application of pilot pistons Lifting AC - Accessories Pilot Pistons Pilot piston Check valve

Accessories Catalog Pilot Pistons Single-acting pilot pistons Seals (optional) Pilot piston order code Bore diameter* Consult factory for bore details. AC - Accessories Pilot Pistons Series Compatible Pilot valves ratio

Accessories Catalog Pilot Pistons Double-acting pilot pistons Series Compatible Pilot valves ratio Seals (optional) Pilot piston order code 621457 621553 625138 625298 AC - Accessories Pilot Pistons Bore diameter* Consult factory for bore details.

rnwnal-rml Accessories catalog a Cavity p|ugs (CP anc| SDC cavities) Member of the Confess Group Cavity plugs are used to block flow into and out of set ports or to block flow between given ports. Plug options Plug options Plug options Cavity type

Accessories Catalog Cavity Plugs (NCS Cavities) AC - Accessories Cavity Plugs (NCS Cavities) Dimensions Type Order number for plug complete Weight of plug complete-kg [lbs.]

rnm=Ml-rml Accessories Catalog ^tutMMM^^v m seal Kits (NCS cavities) Member of the Confess Group washers is indicative only Seals back-up washers (composition) Spares: Set of O-rings and back-up washers (pack of 10 sets minimum) Standard seals Viton seals

Accessories Catalog Orifice Plugs Install in manifold to restrict fluid flow. SPECIFICATIONS Flow vs. Orifice size Typ. Hyd. Oil with Specific Gravity 0.87 and Viscosity 32 cSt [150 SUS] Flow vs. Orifice size Typ. Hyd. Oil with Specific Gravity 0.87 and Viscosity 32 cSt [150 SUS] D P=210 bar 140 bar 70 bar 35 bar 10 bar 5 bar Flow (l/min) AC - Accessories Orifice Plugs M6 x 1.0 T apered Pipe Thread M10 x 1.0 T apered Pipe Thread M8 x 1.0 T apered Pipe Thread 1/16-27 NPTF M12 x 1.5 T apered Pipe Thread M14 x 1.5 T apered Pipe Thread

Accessories Catalog Orifice Plugs ORDERING INFORMATION Or ific e D ia me ter [in] AC - Accessories Orifice Plugs Or ific e P lug P art Number Pl ug Th re ad Si ze M6 x 1 .0 M8 x 1 .0 1/2-14 NP TF Ta pere d P ipe Ta pere d P ipe Th read Th re ad 320153 624910 321561 625958 625414 *Contact factory for additional orifice sizes.