The heart of smart control * ^ Datasheet Order code: ID-DCU Marine Product description > Specialized engine controller for Marine applications Propulsion, Auxiliary, Emergency, Harbour > Provide control, monitoring and protection for variable type of engines > Direct communication with Electronic Control Units > Support of machinery with multiple CAN devices (ECU, ACM, SCR etc.) > Event driven History up to 4 000 records > Redundant architecture: Main unit + Backup module > Backup ID-RPU module with hardwired protections > Plug&Play support of InteliVision display family of ComAp IV5CANBL, IV8MARINE, IV12TOEM > Tier 4 Final + Stage 5 control and visualization > Configurable large PLC interpret with PLC editor and monitor > Connection to engine via primary J1939 and backup J1587 buses > Speed/load control via J1939/J1587 buses, Modbus, Binary and Analogue signals > Configurable Modbus Registers, Modbus RTU and Modbus TCP support for easy integration into the ship’s control system | InteliDrive DCU Marine - 3.8.0 Data- > Symmetrical load sharing for propulsion engines with J1939 (via CAN bus) > Integrated load and clutch control > Switching between primary and secondary battery > Virtual shared inputs and outputs via CAN > Over-speed and Emergency stop detection > Communication capabilities including RS232, RS485, Modem, Modbus, Internet, Ethernet > Remote monitoring via Modbus, TCP/IP, AirGate > Cloud-based monitoring and control via WebSupervisor > Active e-mail messaging and SMS > Available also in low temperature (LT) version > Extendable with ComAp peripheral modules > Single speed engine operation » Auxiliary application » Emergency application » Combined application with harbor mode > Variable speed engine operation » Propulsion application | Related SWver: 3.8.0 | Date of issue: 5/17/2023

Speed pick-up input Power supply Power supply range 8-36 V DC Galvanically isolated from controller body Battery voltage measurement tolerance RTC battery lifetime Up to 10 years (20°C) Note: RTC battery flat causeswrong Date&Time information only. Type of sensor Input impedance Input voltage range Minimum measured frequency Maximum measured frequency Frequency measurement tolerance magnetic pick-up (connection by shielded cable is recommended) 10 kn 4 Vpk-pk to 50 Vpk-pk in range 4 Hz to 1 kHz Operating conditions Operating temperature Storage temperature Humidity Flash memory data retention...

Dimensions, terminals and mounting InteliDrive DCU Marine - 3.8.0 Datasheet

Available extension modules Product Order code Redundant Protection Unit Speed Control Module Communication Module with CAN and RS485/J1587 interface Communication Module with CAN1/CAN2/J1587 interface 8 Analog Input Channels and 1 RPM/Impulse Input Module 8 Analog Channels Module Binary Inputs/Outputs and Analog Outputs Module Analog Input Output Module Analog/Binary Input/Output Module Analogue Input Module Module for Thermocouple Measurement Binary Input/Output Module Analog Output Module Remote Annunciator Related products Product Order code 3G Communication Module with Cellular/Ethernet...

C€ cWus CornApj^ The heart of smart control ©ComAp. Features and specification are subject to change without prior notice.