The heart of smart control * ^ Controller for multiple gen-set applications Datasheet Product description A paralleling controller with 5" colour display for advanced and more complex diesel gen-set applications, supporting both single and multiple gen-sets running in grid-tied or island operations. y Great flexibility and wide range of applications support » User-defined protections and setpoints, large PLC interpreter and easy extendability using SWkey features y Comunication capabilities and protocols » In-built USB host/device, CAN, RS485 and Ethernet ports » Modbus RTU/TCP, SNMP v1, v2c and v3, J1939 y Cyber security by design to protect your business » Requirements of ISA 62443 level 2-3 by design y Support for installations with the option for cooperation with up to 32 gen-sets/mains/tie controllers y Keeping your business and data as safe as possible, meeting the ISA 62443 level 2 - level 3 security requirements » User access management with 10 unique user accounts with individual roles y StageV and Tier4Final ready by default y Multi ECU for communication with more J1939 devices such as engine ECUs, digital AVR etc. y Start-up synchronisation to minimise start sequence time and get the gen-set system up minimum possible delay y PV control supporting small hybrid microgrid (HMG) sites* y Faster and cost-effective operations with signal sharing over a CAN bus across a group of control units* y Modbus Client which can initiate Modbus communication and control 3rd party devices* y Built-in PLC interpreter with the use-to-use PLC Editor y Remote connection and monitoring » AirGate 2.0 for easy connection to your equipment remotely, without worrying about your asset's IP address » WebSupervisor—the cloud-based tool for fleet management y User-defined protections and setpoints on top of default parameters y Compatible load/Var sharing and power management with other ComAp solutions y Slots for plug-in modules for 4G and GPS, additional Ethernet port, RS232/485 connection or additional binary inputs/outputs Application overview *Extended feature (SW key required) | Related HWver: 01.02.00 | Related SWver: 2.4.1

Analog inputs 4x Pick-up lx Binary outputs 8x E-Stop input lx Power supply & D+ 2 x Plug-in modules USB Device USB Host RS 485 Ethernet Note: Dimension "x" depends on a plug-in module Note: Dimensions are in millimeters. Note: The final depth of the controller depends on the selected plug-in module - it can vary between 4 7 mm and "x" mm. Mind also the size of connectors and cables (e.g. in case ofRS232 connector, add about 60 mm more for standard RS232 connector and cable). Note: The controller is mounted into panel doors as a standalone unit using provided holders. The requested cutout size...

Surrounding air temperature rating 70 °C Suitable for pollution degree 2 USB Device USB Host RS485 Ethernet Measurement inputs Measurement range Max. allowed current Accuracy Input impedance Power supply Power supply range Power consumption (without modules) RTC battery Fusing power E-Stop fusing Max. Power Dissipation Protection degree (front panel) Operating temperature Storage temperature Operating humidity Non-isolated type B connector Non-isolated type A connector Isolated 10/100 Mbit Isolated, 250/ 50 kbps, Terminator impedance 120 O Modbus RTU/TCP SNMP v1/v2c/v3 J1939 3ph Gen current,...

Available plug-in modules Product Order code Dual port interface 4G & GPS plug-in communication module Internet / Ethernet plug-in communication module 8 additional binary inputs/outputs Note: Controller has 2 slots for plug-in modules. Available CAN modules Product Order code CAN remote annunciator with 15 LEDs CAN module with 8 analog inputs CAN module with 8 binary inputs and 8 binary outputs CAN module with 8 binary inputs, 8 binary outputs, 4 analog inputs and 1 analog output CAN module with 8 analog inputs dedicated for thermocouple sensors only. CAN module with analog inputs and outputs...

Support offunctions and protections as defined by ANSI (American National Standards Institute): Description Master unit Stopping device Multi-function device Overspeed Underspeed Speed and frequency matching device Data communication device Starting-to-running transition contactor Synchronizing check Thermal relay Undervoltage Aux Battery UnderVoltage Overload (real power) Reverse power Master sequence device Undercurrent Excitation loss Unit sequence starting* Current unbalance Voltage unbalance / Negative sequence voltage "MINT ANSI code ANSI code Description I Incomplete sequence relay 27X...