The heart of smart control * ^ Datasheet Product description y Peripheries dedicated to expand number of I/Os of the main ComAp controller y Supports wide range of sensor types and characteristics y Connection with the main ComAp controller over CAN bus (up to 200 m length) y Extension modules are compatible with » InteliSysNT BaseBox, InteliSysNTC BaseBox, InteliGenNT, InteliGenNT BaseBox, InteliGenNTC BaseBox, InteliMainsNT, InteliMainsNT BaseBox, InteliMainsNTC BaseBox, InteliSysNTC Hybrid, InteliSys GAS, InteliDrive DCU Marine, InteliDrive DCU Industrial, InteliSysNT BaseBox Marine, InteliGenNT BaseBox Marine. > Analog output: 1 channels » Voltage 0-10 V DC » Current 0 - 20 mA » PWM > Analog input: 9 channels » Supported sensors > Peripheral extension module forthe controllers » CAN bus connectivity » Connects analog sensors (via Analog IN ± 75 mV) » Connects measurement unit (via Analog IN ± 65 V) » Connects resistive sensor RPTC (via Analog IN 0 - 2400 Q) » Connects analog control unit (via Analog OUT) | Inteli AIO9/1 Datasheet | Related HWver: 1.0

Power consumption Operation humidityn 95% w/o condensation Heat radiation 2WAnalog inputs (not electric separated)ComAp{>Dimensions, terminals and mountingAIN1 -AIN4: Voltage AIN5 -AIN8: Voltage AIN9:Resistance Analog outputs Voltage range: ± 65 V (nominal) (measurement up to ± 70 V) accuracy: 0-65 V ± 0,25 % of actual value ± 120 mV Measurement is not galvanic separated from power supply, but IN- is not interconnected with GND - there is floating measurement. range: ± 75 mV (nominal) (measurement up to ± 80 mV) accuracy: ± 0,1 % of actual value ±75 pV. Galvanic separated from power supply range:...