HDPE MULTI-CARTRIDGES FILTER (Rating 0 to 50 m3/h) Principle of operation Within the system, water will circulate through the cartridges. The inlet is at the bottom and the outlet at the top, so that pollution is trapped outside the cartridges. Cartridge changing and/or cleaning intervals will depend on the quality of the water entering the filter. Matter deposited by settling is evacuated through a purge. F ields of Application Elements in HDPE are only used for salt water applications: - sh farms, fi - quariums, a - yster farms, o - alt water swimming pools (public and private), s - ea water, s - hermal spas/thalassotherapy/balneotherapy. t Treatment Principle These high rate filters can filter water charged with matter in suspension up to a certain concentration. The filtering level differs according to the nature and size of the particles present in the water. The pollution may be: - rganic matter, o - and, s - ravel, g - eed, w - etal oxides, etc. m Our broad range of cartridges will enable you to install your optimum filtering solution.

HDPE MULTI-CARTRIDGES FILTER (Rating 0 to 50 m3/h) Technical Characteristics - ervice pressure: 3 bar. S - est pressure: 6 bar. T - DPE case reinforced by stainless steel liner. H - ater temperature range: from 5 to 30°C. W - urge ND 50. P - artridges should be changed regularly, depending on the C incoming water quality. Cartridges are changed through the top of the filter. - eals should be changed every 2 years. S Standard Installation CWTI specialists size your equipment to ensure safe, effective and reliable operation. The following information is necessary to enable a PEHD filter to be properly...