Bibloc household water softener
2Pages

{{requestButtons}}

Catalog excerpts

Bibloc household water softener - 1

BIBLOC WATER SOFTENER Part No. q341004001 OPERATING PRINCIPLE Water softeners are devices installed on a cold water pipe to act on the physicochemical composition of the water by reducing the concentration of calcium and magnesium, which cause scaling. The raw (unsoftened) water from the supply system flows through ion-exchanging resins (strong cationic resins), which capture the calcium and the magnesium. The water delivered by the softener no longer causes scaling, and has become "soft". As the water passes through, the resins become saturated with calcium and magnesium. As soon as the resins become saturated, regeneration must be carried out to recharge them. Regeneration is achieved by passing a brine solution through the resins. Regeneration is activated automatically, during the night, by an automatic system built into the softener head. Regeneration can be activated in two ways: • based on volumes consumed (volume mode), • based on time interval (time mode). COMPOSITION AND OPERATING PRINCIPLE - t protects pipes, sanitary ware, and home appliances from I scaling. - t keeps sanitary ware operating at normal efficiency. I - t makes the water more pleasant to the touch for washing I and bathing (body and hair). - softener is also recommended for optimum operation of A Jacuzzis, Turkish baths and home hydrotherapy. Kitchen tap for drinking water- t makes laundry softer and dishes free of marks. I (recommended) - t reduces the need for descaling and softening products. I BIBLOC 4equipment: makes it easy to clean the salt com1 2 3 partment. Suction tube and brine filling Start of cycles at 2 a.m. (the time can be modified) Softener operating cycles Normal cycle sequence during the day Brine made of special salt (EN973 type A) Bottle containing the ion-exchanging resins

Open the catalog to page 1
Bibloc household water softener - 2

BIBLOC WATER SOFTENER Part No. q341004001 TECHNICAL CHARACTERISTICS - Max. system pressure: 4 bars (install a pressure regulator). - Electrical power supply: 230 V with transformer (supplied). - Volume and/or time control of regeneration. - Displays the volume of water remaining to be softened. - Instantaneous flow display. - Mixing built into the softener head. - Settings are saved in the event of a power cut. - Salt compartment with wide filler hatch. - Noryl softener head. - Regeneration: 4 phases. - Supplied with brine drain pipe. - Bypass built into the valve. - Automatic chlorination...

Open the catalog to page 2

All COMAP WT catalogs and technical brochures

  1. UVEO RANGE

    2 Pages

  2. OSMOPACK

    2 Pages

  3. kit bio-rain

    2 Pages

  4. STEP UNITS

    2 Pages