*mydirectindustry

TTK 550

Product catalog summary

Overview: The TTK 550 is a thermal break profile production plant designed for small to medium outputs, requiring 1-2 operators. It has an approximate output of 40-50 bars per hour and can process bars up to 7.5 meters in length.

Production Layout: The plant operates using a single knurling machine, allowing profiles to be produced in two consecutive steps. In the first step, a profile is knurled and two thermal strip bars are inserted. In the second step, another profile is knurled and combined with the first for assembly. A bar storage unit downstream of the knurling machine enhances production efficiency, particularly for small production lots.

Production Steps:

Knurling of the thermal strip bar seat on the first profile and insertion of thermal strip bars using special grippers at the knurling machine exit. The second profile is then knurled, and the two halves are composed.
Fixing of the two halves and thermal strip bars through gradual pressure applied by discs on the profile hammers.
Conducting a shear strength test on a 100 mm sample to ensure assembly quality.

Plant Composition:

Loading roller ways of 2.4 meters
TAB 101 or alternatives TAB 100 or TAB 100 M
TAB 300 knurling machine storage unit
TAB 200 or alternative TAB 200 M
Assembly unit unloading roller way
TAB 400 or alternative TAB 400 M

Catalog excerpts

THERMAL BREAK PROFILE PRODUCTION PLANT Number of operators: 1-2 Approximate output: 40/50 bars/h Max bar processing length: 7.5 m TKK 550 PLANT PRODUCTION LAYOUT (thermal strip bar insertion during knurling). Solution particularly suitable for small-medium outputs. Using just one knurling machine, it allows profiles to be produced in 2 consecutive steps. In step 1, one profile is knurled, with insertion of the 2 thermal strip bars; in the 2nd step, the second profile is knurled. When it leaves the knurling machine, it will be combined with the profile produced in the 1st step, ready for definitive assembly, which follows. The use of the bar storage unit downstream of the knurling machine allows more efficient organisation of production, especially on small production lots. Production steps: 1 - Knurling of thermal strip bar seat on first profile and thermal strip bar insertion via special grippers at knurling machine exit. Knurling of second profile. Composition of two halves. 2 - Fixing of two halves and thermal strip bars via gradual pressure of the discs on the profile hammers. 3 - Performance of shear strength test on sample 100 mm long to test assembly quality. Plant composition: • Loading roller ways 2.4

Open the catalog to page 1

• TAB 101 or as alternative TAB 100 or TAB 100 M • TAB 300 knurling machine storage unit • TAB 200 or as alternative TAB 200 M • Assembly unit unloading roller way • TAB 400 or as alternative TA

Open the catalog to page 2

TTK 550

TTK 550

Catalog excerpts

All COMALL FRANCE catalogs and technical brochures