Catalogs >
COMADAN >
RP10, 1-phase monitoring

RP10, 1-phase monitoring
1Pages

Catalog excerpts

Monitoring of 1-phase supply voltage Separate adjustments of minimum and maximum limits 1- or 2-pole relay output DC supply or AC supplies up to 230 VAC Made in accordance with the and EMC regulations The C-mac® module type RP10 monitors its own 1-phase Functional diagram: supply voltage and checks that it is within the adjusted minimum and maximum limits, and in that case, the out- setpoint put relay is activated. hysteresis The modulecan operate from 80% to 120% of the nominal nom.sup. supply voltage. actual sup. hysteresis setpoint Technical data: Supply voltage: Power consumption: Operation temp.: Humidity: Adjustments: Upper limit: Lower limit: Hysteresis: Indications: Green LED: Red LED: Max. load, relay: 24 VDC, 24 VAC, 115 VAC or 230 VAC +/- 20% 2,5 VA -20°C til +60°C 0 - 90% RH, non-condensing Potentiometer, 105 to 120%. Potentiometer, 80 to 95% 1% of the nominal supply. Supply voltage connected Relay active 1-pole: 8 A - 250 VAC 2-pole: 5 A - 250 VAC, ohmic load Ordering guide: Supply 24 VDC 24 VAC 115 VAC 230 VAC x = output relay: Level Delay Control module Emmision: EN 50 081 - 1 Immunity: EN 50 082 - 2 Safety: EN 60 730 Approvals: The units are produced in accordance with the CE og low voltage regulations. Housing: NORYL-SE-1, grey, self-extinguishing Housing bottom: NORYL SE-1, GFN-2, black, self-extinguishing Terminals: Nickel-plated brass Weight: 110 g

Open the catalog to page 1