AC-Current monitor relays KC62  DP510  KC62 current monitor whit 2 output  Analog output 4-20mA and digital output (on/off)  Build in 60 Amp current transformer  8 selectable measuring ranges  Galvanic isolation between supply and internal electronics  Made in accordance with the CE and EMC regulations  1- or 2-pole relay output KC62 is a universal AC power meter module with both  Made in accordance with the and EMC regulations analog and digital output that can be used independently or concurrently. The KC62 module is suitable for monitoring the motors, compressors, heaters, etc. On the front switch you can select one of 8 measuring range, and a pot-meter set the desired limit for the digital output. KC62 can measure up to 60 A using the internal current transformer. At higher currents, an external standard current transformer can be added. Technical data: Supply voltage: Frequency: Metering range: Analog output: Voltage drop: Accuracy: Response time: Digital output: Max. load, output: Pot meter settings: Hysteresis: Operating temp.: Indicator: Red LED (Output) Constant: Flashes: Yellow (current) Constant: Flashes: Dimensions: L x W x D: Weight: Connections: EMC-data: Emission: Immunity: LVD Analog and digital output Analog output only Digital output only Out of range Measuring 90 x 35 x 57 mm. 80 g. screw terminals, max. 1,5 mm. Note!, Using the digital output only – the negative DC supply must be connected to terminal 8