Catalogs >
COMADAN >
4-digit weight instrument DP571

4-digit weight instrument DP571
1Pages

Catalog excerpts

4-digit weight instrument DP571 Connections for 1 to 4 load cells Tare function and automatic zero setting Supply voltage 9-35 VDC (12-26 VAC) Programming on keypad or RS 485 Front dimensions: 72 x 72 mm, 13 mm LED display Made in accordance with the C€ and EMC regulations DP570 is used for industrial instrumentation, where you want to monitor weight or mechanical load in a control panel. The instrument is also available as a counting scale. Optionally the instrument is available with 1 analogue 4-20 mA metering output and 1 programmable digital output, or with RS485 / CAN connectionl. The instrument is operated on the keypad on the front or via RS485 interface (option 2). It is possible to enter the load cell data, in this way you can change a load cell without recalibration of the instrument The following data are programmable: Zero and span adjustment of the display, light intensity, reaction delay, decimal point, load cell data, digital input function, keypad function, RS485 parameters and aut. zero parameters. With option 1 setpoints, hysteresis etc. are also programmable. Additional informations: See programming manual. Block diagram: Option 1: Option 2: Operating temp.: Humidity: Protection: Temp.coefficient: Linearity: Display range: Calibration accuracy: Metering range: Exc. voltage: Max. metering range: Resolution: Dimensions: LxWxD: Technical data: Supply voltage: 9-35 VDC /12-26 VAC Power consumption: typ. 15 mA @ 24 VDC (with one 350 Q load cell) -10°C to +50°C 0 - 90% RH, non-condensing IP 65 (front) max. 0.01% FS/ °C +/-0.1%FS -999 to 9999 better than +/- 0.5% FS 0.25-30 mV/V exc. (load cells) typ. 4 VDC 0-200 mV (direct metering) min. span 1 mV for 9999 counts according to DIN 43700 72 x 72 x 67 mm Ordering guide: (fComadan WE ERR INEDNNROO Tel.: +45 86 44 78 77 • Mail: sales@comadan.com • www.comadan.com

Open the catalog to page 1