4 digit universal instrument DP545 Universal inputs: mA, V, resistance/potmeter, Pt100, TC 2 relay outputs + analogue output Programmable range, function and setpoints Galvanic isolation between supply and internal electronics Made in accordance with the C € and EMC regulations Reference temp.: Temp.coefficient: Linearity: Mech. dimensions: LxWxD: Panel cut-out: Weight: Materials: Digital input: Galvanically isolated input for display HOLD or reset (tare) function. Outputs: 2 relay outputs with change-over contacts. Function, setpoint, delay, etc. is programmable. 1 analogue output, programmable in the range 0-20 mA / 0-10 V, normal or inverted function. Display / operation: 4-digit LED (+/-9999) with programmable display intensity and decimal point, 2 LED's for relay position, 2 LED's for input trend (rising/falling), and 4 LED's used during programming. 3 buttons used during programming. Technical data: Supply voltage: 24 V AC/DC The supply voltage is galvanically isolated from the internal electronics. (test voltage 4 kV AC) Power consumption: 2 VA Protection: IP 65 (front panel only) Calibration accuracy: better than +/- 0.1% FS 23°C max. 0,01% FS / °C better than +/- 0.1% FS in accordance with DIN 43700 48 x 96 x 105 mm. 43 x 91 mm. 350 g. NORYL, SE1 (fComadan WERRE E EONTRCLL Tel.: +45 86 44 78 77 • Mail: [email protected] • www.comadan.com

I/O specifications: Metering input: Input resistance: 50 Q (supply connected) Voltage. 1. Metering range: 0...10 / 2...10 VDC (max. 12VDC) Input resistance: typ. 130 kQ 2. Metering range: 0...1 / 0.2...1 VDC (max. 1.2 VDC) Input resistance: typ. 10 MQ Potentiometer (3-wire connection). Potmeter value: 100 Q ... 10 kQ Linear resistance (3-wire cable compensation). Metering range: 0...400 Q Cable resistance: max. 10 Q / wire Digital input: Active input: Not active: Input current: Analogue output: 1: Current: Load resistance: Output resistance: typ. 500 Q Relay outputs (change-over...