4-digit pressure instrument DP570 Monitoring of differential pressure Metering input +/- 350 mbar Supply voltage 9-35 VDC (12-26 VAC) Air connection: 4 mm tube Front dimensions: 72 x 72 mm, 13 mm LED display Made in accordance with the C€ and EMC regulations DP570 is used for industrial instrumentation, where you want to monitor differential pressure or level in a control panel. The instrument is also available with 1 analogue 4-20 mA metering output and 1 programmable digital output, or with RS485 / CAN connection!. The instrument is powered by 24 VAC/DC. Connections and programming are made on the back of the unit. Offset, span, decimal point and light intensity are programmable, and if the instrument is supplied with outputs, it is possible to program setpoints, hysteresis and time-delay. Additional informations: See programming manual. Block diagram: Technical data: Supply voltage: Power consumption: Operating temp.: Humidity: Protection: Temp.coefficient: Linearity: Display range: Calibration accuracy: Metering range: Input protection: Dimensions: Lx WxD: 9-35 VDC /12-26 VAC typ. 12 mA @ 24 VDC -10°C to +50°C 0 - 90% RH, non-condensing IP 54 max. 0.01% FS/ °C +/- 0.1% FS -999 to 9999 better than +/- 0.1% FS 0 - 350 mbar max. 1.7 bar (burst) according to DIN 43700 72 x 72 x 67 mm