3½ digit panel instrument DP510 Miniature display - front dimensions 24 x 48 mm Current or voltage indication Supply voltage 9-35 VDC / 9-26 VAC Galvanic isolation between supply and internal electronics Made in accordance with the and EMC regulations DP510 is a 3½ digit panel instruments with LED display, and because of the small dimension it is very suitable in various kinds of control panels. DP510 is supplied with selectable metering ranges 0-20 mA, 0-1 V and 0-10 V, and by means of switches on the top and potentiometers on the back of the instrument the display range is adjustable, as well as the decimal point. Technical data: Supply voltage: Power consumption: Operating temp.: Humidity: Protection: Temp.coefficient: Linearity: Display range: Metering ranges: Input protection: Outside range: Input impedance: Dimensions: L x W x D: Panel cut-out: Weight: Materials: Connections: EMC-data: Emission: Immunity: Safety: 9-35 VDC / 9-26 VAC The supply voltage is galvanically isolated from the internal electronics. typ. 60 mA @ 24 VDC -10°C to +50°C 0 - 90% RH, non-condensing IP 44 max. 0,01% FS/ °C +/- 1 count -999 to 1999 0-1 V, 0-10 V and 0-20 mA +/- 36 VDC (all ranges) Display shows "1---" Connection and calibration: Top view Back view 8-pole dip-switch, select metering range and decimal point 1.999 1: Select metering range on switch 2-3 2: Set coarse adjustment of range and offset at switch 1, 4 and 5 3: Connect minimum input signal and adjust to the wanted minimum display at the 0% trimmer. 4: Connect maximum input signal and adjust to the wanted maximum display at the 100% trimmer 5: Check min. reading and repeat step 3-4 if necessary. 6: Select wanted decimal point at switch 6-8 Block diagram: Voltage metering: >100 kW Current metering: typ. 75 W according to DIN 43700 24 x 48 x 95 mm. 21,5 x 43,5 mm. 90 g. NORYL, SE1 screw terminals, max. 1,5 mm. EN 50081-2 EN 50082-2 EN 60730 Comadan Produktion a/s Tel.: +45 86 44 78 77 · Mail: [email protected] · www.comadan.com