HP6000
1 / 16Pages

Street sweeping machines Only one sweeper to collect dirt, shred waste and vacuum dust HIGH PERFORMANCE MACHINES

HP6000, the 6 cu.m sweeping machine developed to clean urban and industrial areas HP6000 is a high performance street sweeper which combines in one single machine the performance of two, thus ensuring maximum quality results. Roads, parking lots and large squares are currently cleaned using mechanical or suction collection machines. These two systems are suitable for different types of cleaning: mechanical machines are more suitable for heavier waste and suction machines are more suitable for lighter waste, therefore selection of one or the other inevitably entails a compromise in terms of...

Therefore, Comac has designed the Twin Action System, a unique technology which combines the strength of mechanical action to collect larger waste and the efficiency of the suction action for dust, to provide excellent results, with one machine, in a single pass. The powerful Twin Action System vacuums also the fine dust PM10 and reduces water consumption, facilitating use even in the most difficult conditions.

HP6000: only one machine which combines the action of two, in order to reduce times, consumption and costs INNOVATION twin action* system TWO COMBINED ACTIONS TO ACHIEVE 100% PRODUCTIVITY AND MAXIMUM QUALITY VACUUM ACTION Dust capture The mechanical action consists in the movement of the central brush (1) which collects the material from the ground and conveys it to a hopper where is shredded by the hammers of a rotating shaft (2). At this point, by means of the suction action (3), the material is raised to the collection hopper (4), while the sucked air is filtered (5) and returned to the...

HP6000 ensures excellent results both on streets and in industrial environments INNOVATION Return of clean air into the environment Lifting duct Rotating shaft with hammers The new collecting system dramatically reduces wear and maintenance of mechanical parts, thanks to the central mechanical shaft that is made of steel and hydraulically operated. Waste container Central brush

A new cleaning system: the cleaning action is concentrated only on the central brush PERFORMANCE SUCTION HOSE (optional) The operator can use the suction hose to collect material accumulated in areas difficult to be reached with the machine such as benches, grassy areas, or other covered corners. Thanks to the large diameter of the hose, it can suck up waste of various dimensions such as paper, leaves, bottles and cans. PERFECT CLEANING HP6000 uses the central brush continuously, thereby ensuring higher quality cleaning because it is uniform for the entire width of the brush and higher...

HIGH PRESSURE WASHER WAND (optional) The high pressure washer wand cleans hard-to-reach areas, removes dirt from vertical surfaces, from walls and can be used to clean the machine itself. THE THIRD BRUSH (optional) It allows to collect debris from areas far from the machine, along walls and on sidewalks. It is designed for operation on both the sides of the machine. The brush movement, rotation and tilt, are controlled by a convenient joystick. The machine is very effective in one-way streets since it can clean the entire width in a single pass. THE TWIN ACTION SYSTEM MAKES YOU SAVE UP TO...

With HP6000 suction is even possible in wet road conditions PERFORMANCE With “By-pass” system The “By-pass” system allows deviation of the air flow in order to bypass the filter when working in wet road conditions, for example in the event of rain. Ultra-reliable top emptying system at heights The collection hopper is emptied by lifting it on vertical guides up to 182 cm. The lifting system, similar to that of a forklift, allows significant reduction of stress on the frame and unloading at any intermediate height, according to the characteristics of the unloading area. HP6000 has a high...

3 positions for maximum optimisation of the different working conditions PRODUTTIVITÀ Comac has produced a special device which, acting separately on the four wheels, maintains constant the height from the ground, even when the load varies, optimizing work and stability. The operator can position the machine on three different pre-established levels in order to meet various needs. 1. WORKING POSITION the machine is in the lowest position with the rubber flap close to the ground in order to avoid dust release. 2. MOVING POSITION the machine is raised about 35 mm in order to avoid possible...

Twin Action: the revolutionary system which protects the environment LITRES OF WATER PER YEAR HP6000: - REDUCES WATER CONSUMPTION unlike traditional sweeping machines, the side brushes have an auxiliary function, since they are used only along edges and pavements, thus reducing the use of water which is employed only in a nebulized state and only to control dust, without wetting the ground. - REDUCES FUEL CONSUMPTION AND ATMOSPHERIC EMISSIONS The EURO VI engine is specific for industrial applications and certified in accordance with the strictest atmospheric emissions standards in its...

Large filtering surface to guarantee a clean air return into the environment THE SUCTION SYSTEM Operated by a hydraulic motor which can reach up to 14,000 cu.m/h. The air sucked up from the ground and the dirt shredded by the hammers of the rotating shaft are directed into a rectangular duct. The air flow and the material collected follow a path which slows the speed down causing the fall of heavier dirt, reducing the quantity of particles which arrive at the filter. THE FILTER The filtering unit has a surface of 50 sq.m and is equipped with 2 filter shaking for cleaning. These...

The central console is designed to ensure that all the commands are within easy reach COMFORT The cab is comfortable because it is spacious and insulated with anti-vibration supports. It is comfortable to drive, and the large windscreen provides maximum external visibility for the operator, making manoeuvring and control over the collection area easier. The activation commands, simple and intuitive, are grouped on a central console. The others are on the front part of the roof, both easily accessible from the working position. On request the machine can be customized with a climate control...