CS140
1 / 16Pages

A revolution in urban and industrial hygiene only one sweeper to collect dirt, shred waste and vacuum dust Street sweeping machines Municipal. Equipment

0 covuvoc CS140 T, the 3,5 cu.m sweeping machine developed to clean urban and industrial areas CS140 T 3,5 cu.m, combines the performance of two machines in one single particularly compact machine, thus providing two actions in one solution and ensuring maximum quality results. Roads, parking lots and large squares are currently cleaned using mechanical or suction collection machines. These two systems are suitable for different types of cleaning: mechanical machines are more suitable for heavier waste and suction machines are more suitable for lighter waste, therefore selection of one or...

A sweeping machine designed to respect the environment ATTENTION TO ENVIRONMENT AND SAFETY ARE THE MAIN CHARACTERISTICS OF CS140 T CS140 T ensures: - TO SAVE UP TO 150.000 LITERS OF WATER PER YEAR unlike traditional sweeping machines, with CS140 T the side brushes have an auxiliary function (only used along edges and pavements) consequently reducing the use of water which is employed only in a nebulized state and only to control dust, without wetting the ground. - ELIMINATION OF FINE DUST PM10 FROM THE AIR RETURNED TO THE ENVIRONMENT thanks to the use of a large size filter, which is less...

CS140 T: only one machine which combines the action of two in order to reduce times, consumption and costs INNOVATION twinactiorr system The mechanical action consists in the movement of the central brush (1) which collects the material from the ground and conveys it to a hopper where is shredded by the hammers of a rotating shaft (2). At this point, by means of the suction action (3), the material is raised to the collection hopper (4), while the sucked air is filtered (5) and returned to the environment perfectly clean (6). FLEXIBILITY OF USE The Twin Action system allows operation even...

Besides operating in the urban environment CS140 T can also be successfully used in cleaning phases before asphalting, on road work sites, and in industrial environments, including metallurgy plants and cement factories. Large items such as bottles, cans and branches are crushed and shredded guarantees amazing cleaning results

CS140 T changes the whole concept of cleaning: the cleaning action is concentrated only on the central brush PRODUCTIVITY The side brushes are used only to convey the dirt from the edges (pavements or walls) to the operating area of the central brush, which collects both debris and dust thanks to the highly efficient suction action twin action system CS140 T uses the central brush continuously, thereby ensuring higher quality cleaning because it is uniform for the entire width of the brush and higher productivity because it can clean more quickly than a conventional vacuum sweeper which has...

THE THIRD BRUSH (optional) Designed for operation on both the sides of the machine. The brush movement, rotation and tilt, are controlled by a convenient joystick The side brushes can be equipped with special nozzles for spraying water (optional) which are effective for controlling dust during sweeping Joystick to control the third brush With the Twin Action system the use of water is limited only to the external part of the side brushes in a nebulized state in order to control flying dust. As a consequence CS140 T is equipped with a tank of only 220 litres. WITH TWIN ACTION THE USE OF...

Excellent manoeuvrability thanks to the 4 turning wheels PRODUCTIVITY CS140 T, has an integral steering system on all 4 wheels with symmetrical front and rear angles (the same centre of rotation for the two axles) and a turning circle of 4.25 m. Together with the reduced dimensions, these characteristics provide great manoeuvrability, even near walls or fences, and guarantee the necessary ease of handling to operate in places where space is limited such as historical town centers or cluttered areas, at the same time guaranteeing maximum vehicle stability during transfer even at the highest...

3 positions for maximum optimisation of the different working conditions Comac has produced a special device which, acting separately on the four wheels, maintains constant the height from the ground, even when the load varies, optimizing work and stability. The operator can position the machine on three different pre-established levels in order to meet various needs. 1. WORKING POSITION the machine is in the lowest position with the rubber flap close to the ground in order to avoid dust release. 2. MOVING POSITION the machine is raised about 40 mm in order to avoid possible contact with...

Constant vacuum, to collect any type of dirt ENVIRONMENT Large filtering surface to guarantee a clean air return into the environment Button for activation of the filter shaking Operated by a hydraulic motor which can reach up to 14,000 cu.m/h. The filtering unit has a surface of 50 sq.m and is equipped with 2 filter shaking for cleaning. These characteristics, together with the choice of materials (polyester) and the fact that the filter operates dry, virtually eliminate the need for routine maintenance; they also ensure the return of perfectly clean air into the environment. The air...

With CS140 T suction is even possible in wet road conditions thanks to the filter “By-pass” system The “By-pass” system allows deviation of the air flow in order to bypass the filter when working in wet road conditions, for example in the event of rain. By selecting this mode, the flow of damp air, which is obviously dust-free, does not go through the filter, thus avoiding damage. CS140 T has a high capacity collection hopper which guarantees many hours of continuous non-stop operation Ultra-reliable top emptying system at heights Hopper emptying buttons The collection hopper is emptied by...

The central console is designed to ensure that all the commands are within easy reachCOMFORT The cab is comfortable because it is spacious and insulated with anti-vibration supports. It is comfortable to drive, and the large windscreen provides maximum external visibility for the operator, making manoeuvring and control over the collection area easier. The activation commands, simple and intuitive, are grouped on a central console. The others are on the front part of the roof, both easily accessible from the working position. On request the machine can be customized with a climate control...