Pull tester for roofing fasteners
2Pages

The Extractor fastener tester is an essential tool in building industries, where it is important to validate and check for faulty fixing anchors on both new and old construction. This dedicated kit comes with a full range of accessories: - A Pull tester (with its calibrated gauge 1000lb or 2000lb, analog or digital) - Lifter foot for standard roofing screw LFS0250 (shank: 1/4” – Head: 5/8”) The Fixuroof portable pull-tester is an accurate unit, designed for testing on the field the pull-out force for base ply fastener. Easily determine whether the mechanical fastener provides sufficient resistance to static uplift force to meet the wind load requirements. Today, Com-Ten pull-out tester are accepted as the world standard for direct tensile test on roofing fasteners and construction, and the name Com-Ten is synonymous with the technique. Com-Ten has, since the beginning of the 60's, been forerunners in the development of fastener testers and mechanical attachment to suit almost all applications. The principal objective in the use of a pull tester system is to validate the withdraw resistance of fixings on substrate. During the last decade the use of pull tester has become more and more widespread. And for good reasons. The usage of Com-Ten pull tester is a very simple, flexible and reliable method that can be used on various substrates: Brickwork, Concrete and with almost any situations encountered during the fixing process. PULL TESTERS EXTRACTOR FIXUROOF 300 FIXUROOF 1000 COM-TEN Industries - 6409 49TH Street North - Pinellas Park, FL, 33781 sales@com-ten.com - Tel: 727-520-1200 - Fax: 727-520-0299 - A Pull tester (with its gauge 300lb, analog or digital) - Fabric lifter foot (shank: 5/8”–Head: 1.25-3.5”) - 10 x replacement fabric membrane - A Pull tester (with its gauge 1000lb, analog or digital) - 2 x heavy duty deck plate lifter foot LFH3500 (shank: 7/8” – Head: 3.5”) ROOFING

The Tile uplift portable tester is an accurate unit, designed for testing the pulling force of installed roof tiles. Easily perform your quality test with our full equipped Tile tester and prevent from loose tiles. The Tile Tester is specially designed for the following domains: - Measure the withdraw load to validate a safe installation of tiles - Test the uplift strength of in place roofing tiles This dedicated kit comes with a full range of accessories: - A Force gauge (Capacity 100lb) - Handle - Chain - Tile Lifter foot TLF1120 A tensile load is applied to the fixing mechanically using...