Single disc machines
12Pages

{{requestButtons}}

Catalog excerpts

Single disc machines - 1

SINGLE DISC MACHINES. 140 TO 1600 RPM

Open the catalog to page 1
Single disc machines - 2

O Robust single-disc machines 'Made in Germany' - for over 70 years. For daily, long-term use. O Low speed machines up to 300 rpm are equipped with a planetary gear set with three planet gears. The configuration of the maintenance free planetary gear and the powerful motor is the ideal pair guaranteeing consistently high performance. O Three non-wearing, helical cut planet gears spread the power evenly across the entire working width, which allows for quiet running and easy control of the machine. A belt drive ensures low running noise in machines with high motor speeds of up to 1600 rpm. O...

Open the catalog to page 2
Single disc machines - 4

LOW SPEED. PROS WITH PLANETARY GEAR SET. FOR ANY OBJECT, FOR ANY APPLICATION. E 400 S bionic E 500 E E 500 S E 400 S Versatile, tried-and-tested classic machine for stripping, sanding, cleaning, shampooing and buffing – with 400-millimetre working width for use on small and medium-sized surfaces. The water supply is conveniently controlled via the handle

Open the catalog to page 4
Single disc machines - 5

L x W x H Working width Ground clearance max. Working height max. Noise level Weight ELECTRICAL DATA Rated voltage 230 V / 50 Hz 230 V/ 50 Hz 230 V/ 50 Hz 230 V / 50 Hz bionic O Efficient stripping, cleaning and shampooing - with 430-millimetre working width and pads in international standard 17-inch format. O The shatter proof plastic casing protects furniture and fragile objects. E 500lE O With 1200-watt performance, weight of 42-kilogram and a 500-millimetre working width, this is the right machine for large surfaces and demanding tasks such as crystallization of...

Open the catalog to page 5
Single disc machines - 6

THE ALL-ROUNDER. DuoSpeed HS 403 DuoSpeed Two performance classes in one machine - all at the push of a button: 150 rpm at 1300 watts or 300 rpm at 1800 watts. O For stripping of hard floors, intermediate cleaning of textile floors, light polishing work, spray cleaning and polishing of floor coatings. The maintenance-free planetary gear with three planet gears transfers the power optimally across the entire working width. HS 403 O This machine - with a high-torque, centrally mounted motor - is ideal for economical spray cleaning and polishing in buildings with various surfaces. L x W x H...

Open the catalog to page 6
Single disc machines - 7

HS 434 O Single-disc machine for treatment of floor coatings and, with the optional suction unit, ideal for renovation of coatings to protect modern floor surfaces. O The belt drive allows large surface areas to be covered, with low noise levels of just 57 decibels when running. HS 1001 O Easy to control and gets the work done fast: this powerful, highspeed machine with a belt drive ensures a high-gloss finish on large surfaces. HS 1601 A super shine on even the hardest surface coatings is guaranteed thanks to 1600 rpm. The mechanical pressure limit protects the floor covering from damage....

Open the catalog to page 7
Single disc machines - 8

O Patented, economical damp cleaning system to leave carpeted floors in offices, businesses, hotel rooms and IT centres clean and immediately usable. O Impressive operating principle: the cleaning agent uses heat to quickly loosen even worn-in dirt, which is picked up fast and without residue by the Queen Bonnet Pad. O The system works equally effectively on all kinds of carpet and contributes to maintaining the quality of the flooring. O Whisper quiet: the machine produces very little noise when in operation and can be used during working hours. The heat supply can be altered by adjusting...

Open the catalog to page 8
Single disc machines - 9

O Better for the environment: the moistened pad allows for the deep and thorough cleaning of carpets with minimal use of cleaning agents. O The special cleaner Maxil can be sprayed easily and evenly onto the floor with the pressure sprayer, and worn-in stains can be additionally targeted and treated. O Expanded spectrum of uses: the Thermopad is also suitable for oiling of parquet and wooden floors -with less oil, deeper penetration and significantly shorter drying times compared to conventional methods. O What's more, by using the Thermopad, wax stains in churches or catering areas can be...

Open the catalog to page 9
Single disc machines - 10

THE RIGHT ACCESSORY. MAKES MORE OUT OF YOUR MACHINE. Additional weights Additional weights allow the grinding pressure to be individually adjusted for a uniform surface pattern, even on difficult surfaces. Tank Twelve-litre plastic tank for the use of cleaning solution during work. The tank is easy to remove and has a large opening for quick filling. Spray tool Suitable for even spraying across floors when cleaning, spray cleaning or crystallisation. Complete spray kit includes pump spray bottle, hose and a double clamp to fix the spray tool to the handle bar. Suction unit Suction tool with...

Open the catalog to page 10
Single disc machines - 11

Pad holder O Universal, entirely dust-proof and waterproof, autoclavable up to 140°C: the innovative columbus pad holder with laser-welded connection between base plate and rubber plate. O Thanks to a new manufacturing process and special plastic formulation, the pad holders have almost limitless durability and are completely recyclable. Brushes O columbus brushes have dense, stiff bristles across the entire exposed area, for increased stability, quieter running and less wear and tear. O Diagonally positioned outer bristles allow cleaning work to the very edges. Extras O Grinding mesh and...

Open the catalog to page 11
Single disc machines - 12

70021802 | 2018/3 | Technical data subject to change without notice. G. Staehle GmbH u. Co. KG Mercedesstrasse 15 D 70372 Stuttgart Phone +49(0)711/95 44 - 960 Fax +49(0)711/9544 - 941 export@columbus-clean.com www.columbus-clean.com

Open the catalog to page 12

All Columbus catalogs and technical brochures

  1. RA 43|BM 40

    4 Pages

  2. RA 43|B 40

    4 Pages

  3. RA 43|K 40

    4 Pages

  4. RA 35 ıB 10

    3 Pages

  5. IDV 100

    3 Pages

  6. IDV 60

    3 Pages

  7. IDV 60 ECO

    3 Pages

  8. IWV 40|100

    3 Pages

  9. IWV 80

    3 Pages

  10. SW32|P

    2 Pages

  11. E 500 ıE

    2 Pages

  12. E 500 ıS

    2 Pages

  13. E 400|S

    2 Pages

  14. RA 43 ıB 20

    5 Pages

  15. RA 35 ıK 10

    2 Pages

  16. Sweepers

    24 Pages

  17. SW 3000

    2 Pages