AJH and AJSAluminium hydraulic jacksCapacity 6.5 - 100 t Aluminium jacks combine light weight with high lifting capacity. The use of high tensile aluminium alloy allows lifting capacities of up to 100 tons resulting in a very favourable 1.8 tons lifting capacity per 1 kg weight ratio. Operation of Yale hydraulic jacks is very simple. Jacks are supplied ready for use, i.e. including hydraulic oil, operating lever and, where applicable, carrying handle and lifting claw. Jacks from 20 tons are available with a lifting claw. In this case the jacks are provided with an elongated base plate. The max. permissible working load of the lifting claws is 40 % of the jack capacity. Jacks from 20 tons can be supplied with a safety lock nut. This device allows absolute safe jacking over a long period. In this case the hydraulic jack can be operated like a mechanical support and the hydraulic system can be totally released. Hydraulic jacks are universally popular tools for use in workshops or on site for all kinds of lifting and assembly applications, for construction, shipbuilding, power plants, general engineering, metal fabrication and many more. Applications are unlimited. Standard jacks with plain piston and jacks with safety lock nuts cannot be used with a lifting claw. To increase stability, all jacks with long stroke (305 mm) are equipped with an elongated base plate. • The 6.5 and 10 tons jacks can be operated in any position (also upside down) and are equipped with spring return piston and stop ring. • The 20 to 100 tons jacks can be operated vertically or with front face in horizontal position. • All jacks are provided with an overload protection valve. • From 20 tons capacity with additional mechanical stroke limiter. • All jacks with hardened alloy steel saddle and sensitive lowering valve which is activated by the operating lever.

Hydraulic Jacks & Tools Jacks Yale Jacks with lifting claw Jacks with safety lock nut Capacity of lifting claw max. Overall height Base plate Height of lifting claw min.