ELECTRIC CHAIN HOISTS ELECTRIC CHAIN HOIST 1/8 TO 2 TON CAPACITIES S The JLC is engineered and nd built for the heavy-duty demands of industrial applications. Compact in size but big on features, the JLC boasts sts a multiple disc motor brake, overload ad clutch, and chain end stop for safety. afety. BENEFITS & FEATURES STANDARD LIFTS 10, 15 & 20 foot standard lifts. Other lifts available. Standard push button drop is 4 feet less than lift. CSA approved. VOLTAGES 115/230 - single phase; 230/460, 208, 380, 415, 575 three phase; 60 hertz standard, 50 hertz available. EASY ACCESS FOR MAINTENANCE Panel plate provides easy access to controls and motor leads for changing voltage on dual-voltage motors or servicing the hoist. Connection wires are numbered to assist with maintenance. HEAVY-DUTY MOTOR BRAKE Multiple disc motor brake with direct acting design for positive load spotting and holding. SMOOTHER LIFTING & REDUCED CHAIN WEAR 5-pocket load sheave increases chain and sheave engagement 25% over hoists with conventional 4-pocket sheaves. Provides smootherr lifting and reduces chain wear. ADJUSTABLE LIMIT SWITCHES Regulate upper and lower load travel. Brass nuts standard for improved switch setting and repeatability. Stainless steel limit switch shaft standard. GUARDS AGAINST UNSAFE LOADING Mechanical overload protection device protects hoist, operator and supporting structures from damaging overloads, chain jamming, and reverse phasing. TWO-SPEED HOIST MODELS Optional with 3:1 speed ratio, 3-phase, single voltage only. LONGER & QUIETER OPERATION Oil bath transmission and precisionmachined alloy steel gears for longer, quieter operation. NEMA 3R PUSH BUTTON STATION Ergonomic design fits operator’s hand for thumb or two-handed operation standard. 24V Control for operator safety. 115V Control available upon request. COMPACT ALUMINUM FRAME Housing designed for portability and ease of installation. STANDARD CHAIN CONTAINER Durable chain container is standard on lifts up to 20 ft. single chain and 10 ft. double chain. OPTIONAL VFD Variable frequency drive option is available in U.S. only. LIFETIME WARRANTY

* Rigid top hook standard. Specify rigid lug, if desired. (Max flange width for JLCET is 8", JLCMT is 9") For JLC with geared trolley - consult factory. '* Standard trolley speeds are 35 & 75 FPM. Optional speeds available, consul factory. Specify speed when ordering. columbus mckinnon USA: 800.888.0985 • 716.689.5400 • Fax: 716.689.5644 CDN: 877.264.6478 • Fax: 877.264.6477 www.cmworks.com © 2014 Columbus McKinnon Corporation. All Rights Reserved. Stock #PS-COF-JLC-ENG-1014