The Complete Marking Stamp and Die Catalog
36Pages

Sharp Face Characters are engraved with a sharp edge. A sharp face tool penetrates more easily than other styles. > Size Flat Face Characters are engraved with a flat face instead of a sharp edge in order to produce a wider impression. This face is often used on brass or other non-ferrous metals. Since more material is displaced moreforce is re Open Face Characters have two sharp face lines to produce double line impression of an outline character. This style is used to emphasize trademarks or designs. > Size q uired. > Size Ball Face Characters are engraved with a special rounded face for...

Pounds per Character 01000 2000 30004000500060007000 1/16, .0043/32, .0051/8, .0073/16, .0091/4, .010 Character Size/ Optimal Depth of Mark Aluminum (Cast) Brass (Soft)1018 Steel Carbon Steel >

A B Style Lay-out Name Character Engraving Size Depth TSTier Style > Example of Tier Style >

Mark Symbol Suffix Dash - -DD Period . -PP Comma , -CC > Ampersand & -AA Number sign # -TT Multiplication X -MM Equals Sign = -EE Colon : -LL Plus Sign + -UU > Percent Sign % -QQ Dollar Sign $ -BB >

Shank Style Dies. Shank sizes and lengths made custom to suit press and application. > Please select symbol number required from listing of 600 styles. Plain Round Dies. Used as an insert or in a press to mark codes, trademarks, part numbers or other legends. Available in any diameter or length. Combination Engraved Dies and Type holder . An engraved die with recesses for interchangeable type permits changing a portion of a legend while the basic engraving remains constant. Radially Engraved Shank Style Dies .Used in a press when a radial impression is desired on a flat surface. >

Symbols can be engraved on any type, insert, or hand stamp Specify symbol required by SYM### after the catalog number of the stamp Some Symbols may require a wider blank than the standard letters Numbers or Letters may be specified inside symbols >

Flat type is held into a holder with a set screw. This method is recommended for use only in applications with smaller forces, and minimal machine vibrations. Applications include: Model 78 Mite-E-Mark rod style A Some brands of hand holders Custom holders Step style type is held into a holder with a plate or clip. This method offers very easy changing of the marking legend. Applications include: Press holders P series Dovetail holders ֖ DM Series Hand holders H series and R Buster Double step type may be used in the same applications and offers orientation versatility. Multi- Character...

Char Size A B C Catalog No. 1/32 1/16 1/4 CMF03- >

Groove type is held into a holder with a spring clip or pin. This pin is made of spring steel, and is designed to withstand impact forces.Applications include: All air impact markers HG Series Hand holders Custom holders Groove type comes in a variety of standard configurations: CMG, CMC and CMV. Custom sizes can be ordered by providing the blank information (see page 25). Reverse Groove type is the same as the standard, but with the groove located at the top of the character. Denote reverse groove option as follows: CMGR, CMVR, CMCR. Multi- Character stamps are easily ordered by extending...

Char Size A B C Catalog No. > Char Size A B C Catalog No. >

Catalog No. Prick Punch > Included angle 1/4 diam CM7XP60 60 Degree included angle CM7XP9090 Degree included angle CM7XP120120 Degree included angle > 3/4Ԕ Catalog No. Prick Punch > Included angle 3/8 diam CM8XP60 60 Degree included angle CM8XP9090 Degree included angle CM8XP120120 Degree included angle > 1 Լ Catalog No. Prick Punch > 1/2Ԕ diam Included angle CM9XP60 60 Degree included angle CM9XP9090 Degree included angle CM9XP120120 Degree included angle > 1 ܔ

Flat Face Standards CMT specializes in identification including: date codes, lot numbers, part numbers, and serial numbers. CMT also makes custom logo dies such as the example shown to the right. Shown at left is our standard flat face stamp with a flat character face height of 8%. We also have other sizes available, such as stamps with a flat character face height of 5%, 10% and 15% (shown at right). For very large characters, greater than 1, CMT offers cross hatching of the character face. This promotes a better securing of the foil on large flat surfaces. Extra Deep Engraving: Required...

Char Size A B C Catalog No. 1/32 1/16 1/4 CMFH03- 1/16 1/16 1/4 CMFH06- >

Ideal for Marking: Gear blanks CMR Radial Type holders are designed to specific customer requirements for marking circular impressions on flat surfaces. Cutter essS h a nk PD and PL Diameter and Length of Pilot (Shown in red) Pulleys circular impressions on flat surfaces. Shafts SL Length of Press Bearings Wheels S h a nkSD ֖ Diameter of Pr Bushings R1 Radius to center of characters When Ordering CMR Radial Type Holders Please Specify the Following Information: > 1. Character Size 2. Radius to center of character (R1) 3. Number of Recesses 4. Type Capacity of Each Recess 5. Shank Diameter...

Shapes for Every Marking Application 2. For marking hexagon and octagon shaped parts on two adjacent surfaces. The two parts of the split roll dies are bolted together. 1. For marking on flat surfaces or in recesses, the engraving is on the periphery of the roll die. 4. Roll dies with relieved section to facilitate loading and unloading of parts. Also to clear projections on marking surface. 3. Two or more impression roll dies are recommended where impression takes up only a fraction of the die circumference. Additional blank cost is saved by repeating the legend on opposite side. 6. For...

Lettering Knurl (Round Die) D = diameter W = width D > b = diameter of bore K = width of keyway K/2 = depth of keyway (D x W x D K/2 > b x K x K/2) KD W Db >

Model R900 Specially designed for use in CNC turning centers > In-line operation allows for efficient marking during primary operations Completely eliminates need for secondary marking process Ideal for fittings, couplings, nozzles, collars and many other parts turned in a lathe, screw machine, multiple spindle or chucking machines Roll style options include spring return with locking feature, or spring return Adaptors and custom mounts available Special designs available including free running holder designed for multiple revolution marking and knurling All dimensions are approximate....