Catalogs >
COLOMBO FILIPPETTI >
H65T - HSOT - H105T - H130TL H..T

H65T - HSOT - H105T - H130TL H..T
8Pages

Catalog excerpts

Cast iron housing. Complete mechanical synchronization of cycle. Low noise and smooth motions compact design. Possibility to install worm gear reducer. Largely maintenance free. Various standard movements. http://www.coﬁl.com - E-mail: coﬁl@coﬁl.com Via G. Rossini 26 - 24040 Casirate D’Adda Bg IT Phone +39 0363 3251 - Fa

Open the catalog to page 1

The units of measurement correspond with System International /Severity Index SI General tolerances of manufacture are conform to UNI - ISO 2768-1 UNI EN 22768- 1 Illustrations and drawings according to UNI 3970 (ISO 128-82). Method of projection of the drawings. All rights reserved. No part of this catalogue may be duplicated. COLOMBO FILIPPETTI may make any changes they feel necessary for the improvement of their products without advance notice. COLOMBO FILIPPETTI may change any market components and accessories mentioned in this catalogue as they feel necessary. This catalogue supersedes...

Open the catalog to page 3

GENERAL INFORMATION The INTERMICO manipulator is a compact mechanism which can be utilised wherever there is a need to load, unload, transport or simply re-position parts or small working units automatically, swiftly and smoothly. The required movement is achieved by the manipulator by means of a completely mechanical transmission with conjugate cams,ensuring a precise movement without back-lash throughout the entire cycle of re-positioning. The INTERMICO manipulator can be activated either in automatic mode with its own electric motor, or by direct coupling to the main drive-shaft with...

Open the catalog to page 4

TYPE OF STANDARD MOVEMENT In the diagrams of the movements, the broken lines represent the pauses movement. The manipulators with Type A1 movement make only a half cycle in one complete rotation of the input shaft; its path going from 0 to 0’. The whole cycle (from 0 to 1) is thus completed in two revolution of the input shaft ∅. The key-way of the shaft ∅ is in a horizontal position when the tool-holder plate is either at the points 0 or 0’ in the cycle. One complete cycle is completed in the period which goes from 0 to 1 in the move

Open the catalog to page 5

Series Type of movement Speed ( cycle/min or Reduction Ratio)_ Versions: VS = Manipulator without reducer or motor. VRI = Manipulator with reducer but without motor. VAI = Manipulator with Brake-motor. VKI = Manipulator with motor and clutch-brake unit. NB. List all the characteristics of any drives requested.

Open the catalog to page 6

Ito create] in movement with the times Products Cam Mechanisms and special products Compact double spherical cam mechanism for mechanical automation Combination of flat cam and globoidal profiled cam Globoidal cam mechanism with four synchronized intermittent movements. Bilateral outputs. Mechanism with different cams producing seven synchronized the culture of precision Flat cam with conjugate profiles

Open the catalog to page 8